SKF Nitrile Rubber (NBR) Seal, 60 mm ID, 95 mm OD, 10 mm

This seal is a rotary shaft sealing solution designed to separate rotating and stationary machine parts and to retain lubricants while excluding contaminants. It features a rubber outside diameter and an elastomeric sealing lip backed by a spring to maintain contact with the shaft in contaminated environments, making it suitable for rotating equipment in automation, electronics and mechanical assemblies.

• Nitrile rubber lip resists common oils and greases
• Garter spring maintains sealing pressure during rotation
• Auxiliary non-contact lip improves dust exclusion
• Supports circumferential speeds up to 8.58 m/s
• Operates between -40°C to 100°C under normal use
• Withstands short-term temperatures up to 120°C

• Suitable for rotating motors and gearboxes in automation systems
• Ideal for bearing housings in electrical drive units
• Used with shafts in electronic cooling fans and actuators
• Can be used for sealing grease or oil in industrial pumps

It accommodates typical shaft misalignment and moderate surface imperfections thanks to the flexible lip and spring-assisted contact.

Maximum recommended rotational speed is 2,760 r/min

The seal is suitable for low pressure differentials around 0.03 N/mm², appropriate for lubricant retention rather than fluid pressure containment.

The rubber outside diameter requires a correctly sized bore to ensure a proper interference fit and to support the reinforced rubber–metal construction.