透過選取一個或多個屬性來查找類似產品。

Datasheet - 60X80X8 HMS5 RG

COO (Country of Origin):: CN

SKF Seal, 60mm Inside Diameter, 80mm Outside Diameter - 60X80X8 HMS5 RG

This radial shaft seal is designed to separate rotating and stationary components, preventing oil or grease leakage in machinery. It features an elastomeric sealing lip with a spring to maintain contact and a rubber outside diameter for press-fit into housings, making it suitable for rotating assemblies in industrial equipment.

Features & Benefits

• Nitrile lip resists oil and grease exposure
• Garter spring preserves radial sealing force during rotation
• Accommodates shaft misalignment to reduce wear
• Permissible circumferential speed 8.58 m/s for dynamic usage

Applications

• Suitable for bearing housings in automation equipment
• Ideal for gearboxes requiring oil containment
• Used with rotating shafts in electrical drive systems
• Can be used for maintenance of industrial motors and pumps

What limits the rotational speed I can use it at?

The seal is rated to a maximum rotational speed of 2760 r/min

exceeding this may increase heat and compromise the sealing lip.

How does the outside construction affect installation?

The rubber outer diameter with metal reinforcement provides a secure press-fit in the housing bore while allowing some compliance for easier assembly.

What temperature excursions can it tolerate briefly?

Short-term exposure up to 120°C is permitted, above the continuous 100°C operating maximum, for transient thermal events.

Is there an accessory to protect worn shafts prior to fitting?

A compatible speedi-sleeve is specified for repair of damaged or worn shaft surfaces before seal installation.

選取全部	屬性	值
	品牌	SKF
	Product Type	Seal
	Seal Type	Rotary Shaft Seal
	Thickness	8mm
	Seal Material	Nitrile Rubber (NBR)

	選取全部
	品牌 SKF
	Product Type Seal
	Seal Type Rotary Shaft Seal
	Thickness 8mm
	Seal Material Nitrile Rubber (NBR)

SKF Nitrile Rubber (NBR) Seal, 60 mm ID, 80 mm OD, 8 mm

訂單超過 $1,300.00 免費送貨