SKF Nitrile Rubber (NBR) Seal, 30 mm ID, 52 mm OD, 7 mm

查看所有Seals

小計（1 包，共 10 件）*

TWD633.00

(不含稅)

TWD664.60

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 110 件準備從其他地點送貨
  • 加上 100 件從 2026年7月13日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
每包*
10 +TWD63.30TWD633.00

* 參考價格

RS庫存編號:
267-3389
製造零件編號:
30X52X7 HMS5 RG
製造商:
SKF
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

SKF

Product Type

Seal

Seal Type

Rotary Shaft Seal

Thickness

7mm

Seal Material

Nitrile Rubber (NBR)

COO (Country of Origin):
CN

SKF Seal, 30mm Inside Diameter, 52mm Outside Diameter - 30X52X7 HMS5 RG


This seal is a rotary shaft sealing element designed to separate rotating and stationary components and retain oil or grease within assemblies. It features a rubber outer diameter and a single elastomeric sealing lip fitted with a garter spring to maintain radial contact, making it suitable for rotating shafts in industrial equipment.

Features & Benefits


• Nitrile rubber lip provides compatible resistance to oils and greases
• Garter spring maintains a consistent radial load during rotation
• Handles circumferential speed up to 5.77 m/s for moderate-speed shafts
• Operates between −40°C to 100°C for a broad temperature range
• Withstands short-term peaks to 120°C for transient thermal events

**Applications**


• Suitable for Seals in motors and pumps requiring oil retention
• Ideal for rotating shafts in automation equipment
• Used in gearboxes where grease containment is required
• Can be used for shaft interfaces in electrical actuators

What shaft sizes will this component accept?


It is engineered to fit a 30mm shaft diameter and locate in a 52mm housing bore with a 7mm axial width.

How does it cope with shaft misalignment or eccentricity?


The elastomer lip and flexible rubber outer diameter permit some misalignment accommodation while the spring preserves sealing contact.

What rotational speed limits should be observed?


Maximum recommended rotational speed is 3,660 r/min to avoid exceeding the stated circumferential speed limit.

Can it be used where slight pressure differentials exist?


It tolerates a nominal pressure differential of 0.03 N/mm across the seal interface.

Are any complementary items suggested for installation?


A thin protective sleeve, such as a Speedi-Sleeve, may be used where shaft wear or grooves are present to aid correct seating.

相關連結