SKF Nitrile Rubber (NBR) Radial Shaft Seal, 45 mm ID, 72 mm OD, 8 mm
- RS庫存編號:
- 267-0260
- 製造零件編號:
- 45X72X8 HMS5 RG
- 製造商:
- SKF
小計（1 包，共 10 件）*
TWD977.00
(不含稅)
TWD1,025.80
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 20 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 + | TWD97.70 | TWD977.00 |
* 參考價格
- RS庫存編號:
- 267-0260
- 製造零件編號:
- 45X72X8 HMS5 RG
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Radial Shaft Seal | |
| Inside Diameter | 45mm | |
| Outside Diameter | 72mm | |
| Seal Type | Rotary Shaft Seal | |
| Thickness | 8mm | |
| Seal Material | Nitrile Rubber (NBR) | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Radial Shaft Seal | ||
Inside Diameter 45mm | ||
Outside Diameter 72mm | ||
Seal Type Rotary Shaft Seal | ||
Thickness 8mm | ||
Seal Material Nitrile Rubber (NBR) | ||
- COO (Country of Origin):
- CN
SKF Radial Shaft Seal, 45mm Inside Diameter, 72mm Outside Diameter - 45X72X8 HMS5 RG
This radial shaft seal provides a sealing solution for rotating shafts, preventing lubricant leakage and excluding contaminants in rotary assemblies. It is manufactured from nitrile rubber and is intended for use where a resilient elastomer contact seal is required around a moving shaft.
Features and Benefits:
• Nitrile rubber compound resists common oils and greases
• Rotary design maintains continuous contact during shaft movement
• Sealing lip geometry minimises fluid escape under rotation
• Robust 8mm thickness improves longevity under axial load
• Compatible with moderate temperature and chemical exposure
• Rotary design maintains continuous contact during shaft movement
• Sealing lip geometry minimises fluid escape under rotation
• Robust 8mm thickness improves longevity under axial load
• Compatible with moderate temperature and chemical exposure
Applications
• Suitable for bearings in industrial gearboxes
• Used with motor shafts in general machinery
• Ideal for pump shaft sealing duties
• Can be used for transmission component sealing
• Appropriate for rotating assemblies in factory equipment
• Used with motor shafts in general machinery
• Ideal for pump shaft sealing duties
• Can be used for transmission component sealing
• Appropriate for rotating assemblies in factory equipment
What internal dimension should the shaft diameter match?
The seal is specified for a 45mm inside diameter and should fit shafts sized accordingly.
What external housing bore is required for correct installation?
The outer diameter is 72mm so the receiving bore must accommodate that outside dimension for proper seating.
How thick is the sealing element and what does that imply?
The body thickness is 8mm which provides a substantial cross-section for pressure resistance and handling installation stresses.
Which material is used and why is it chosen for rotary seals?
The material is nitrile rubber, selected for its compatibility with oils and common lubricants.
Is this product suited to dynamic rotary sealing applications?
Yes, the component is a rotary shaft seal designed to operate while the shaft is turning.
相關連結
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 10 mm
- SKF Rubber Metal Reinforced Rotary Shaft Seal 72 mm OD
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 7 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 12 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 8 mm
- SKF Nitrile Rubber (NBR) Seal 72 mm OD, 8 mm