透過選取一個或多個屬性來查找類似產品。

Datasheet - 28X40X7 HMSA10 RG

COO (Country of Origin):: CN

SKF Radial Shaft Seal, 28mm Inside Diameter, 40mm Outside Diameter - 28X40X7 HMSA10 RG

This radial shaft seal is a rotary sealing component designed to prevent fluid leakage on rotating shafts in mechanical assemblies. It is intended for use where a flexible elastomer lip must maintain contact with a moving shaft to exclude contaminants and retain lubricants, operating within typical rotary sealing contexts.

Features and Benefits:

• Nitrile rubber construction resists oils and hydrocarbons
• Rotary seal design maintains dynamic shaft contact
• 7mm thickness provides sustained sealing Interface
• Suitable for moderate temperature NBR applications
• Robust lip profile supports continuous rotation

Applications

• Suitable for sealing rotating pump shafts
• Ideal for use in gearbox housings
• Used with motor drives requiring lubricant retention
• Can be used for industrial actuator shafts
• Useful in maintenance replacement for worn Seals

What shaft size does it fit?

It is designed for shafts with a 28mm inside diameter.

What housing bore is required for installation?

The seal fits into a bore matching a 40mm outside diameter.

What material composes the sealing element?

The sealing lip is formed from nitrile rubber (NBR).

How thick is the sealing cross-section?

The component has a thickness of 7mm.

Is this suitable for industrial sealing applications?

Its NBR construction and rotary design make it appropriate for many industrial radial sealing tasks.

選取全部	屬性	值
	品牌	SKF
	Inside Diameter	28mm
	Product Type	Radial Shaft Seal
	Outside Diameter	40mm
	Seal Type	Rotary Shaft Seal
	Thickness	7mm
	Seal Material	Nitrile Rubber (NBR)

	選取全部
	品牌 SKF
	Inside Diameter 28mm
	Product Type Radial Shaft Seal
	Outside Diameter 40mm
	Seal Type Rotary Shaft Seal
	Thickness 7mm
	Seal Material Nitrile Rubber (NBR)

SKF Nitrile Rubber (NBR) Radial Shaft Seal, 28 mm ID, 40 mm OD, 7 mm

訂單超過 $1,300.00 免費送貨