可享批量折扣
小計（1 件）*
TWD4,882.00
(不含稅)
TWD5,126.10
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 11 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD4,882.00 |
| 5 + | TWD4,638.00 |
* 參考價格
- RS庫存編號:
- 239-6814
- 製造商:
- RS PRO
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | RS PRO | |
| Length | 50m | |
| 選取全部 | ||
|---|---|---|
品牌 RS PRO | ||
Length 50m | ||
不適用
- COO (Country of Origin):
- GB
RS PRO Rope Pull Kit, For Use With All Rope Pull Switches
This rope pull kit from RS PRO contains everything you need to install an emergency stop switch in both hazardous and general areas. Designed for use with all rope pull switches, these are typically found on assembly lines and conveyor belts in manufacturing plants, for example.
The connection kit includes 50 metres of rope, which is more than enough to shut down machinery from a safe distance in an emergency. You can also cut the rope to whatever length you need. This complete kit includes two thimbles, collar clamps, a stainless steel tensioner and M6 eyebolts to support the wire at roughly 2- to 3-metre intervals. 'D' shackles are also supplied, which are used to secure either end of the grab wire to the safety switch.
This rope kit is part of the reliable RS PRO range, which means it's been exhaustively tested for durability and consistency.
The connection kit includes 50 metres of rope, which is more than enough to shut down machinery from a safe distance in an emergency. You can also cut the rope to whatever length you need. This complete kit includes two thimbles, collar clamps, a stainless steel tensioner and M6 eyebolts to support the wire at roughly 2- to 3-metre intervals. 'D' shackles are also supplied, which are used to secure either end of the grab wire to the safety switch.
This rope kit is part of the reliable RS PRO range, which means it's been exhaustively tested for durability and consistency.
Features and Benefits
• Rope pull kit
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 50 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
• For use with all rope pull switches
• Collar grab wire clamp
• Rope length of 50 m
• Kit contains all necessary fittings required, including M6 eyebolts with locking nuts, 2 thimbles, collar clamps, 'D' shackles and cable
• Multi-strand, galvanised steel cable with PVC coating
• Compliant with ANSI/ESD S20.20:2014 and BS EN 61340-5-1:2007 Electrostatic Control Standards
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.