SKF 33210 Taper 50 mm ID Roller Bearing, 90 mm OD

This roller bearing is a single-row tapered unit designed to support axial and radial loads in rotating assemblies, providing sealed protection for moving components within industrial drivetrains and machine spindles. It combines a tapered race geometry with a shielded end to limit contamination ingress while maintaining suitable performance at elevated shaft speeds.

• Tapered raceform delivers combined axial and radial load support
• Shielded end reduces particle ingress for longer in-service intervals
• Steel construction provides structural durability under cyclic loading
• Sheet metal cage offers controlled roller guidance at operating speeds
• High static capacity enables survival under heavy standstill loads
• Limiting speed accommodates high-speed rotational applications

• Suitable for gearbox shafts in industrial assemblies
• Used with wheel hubs requiring angled contact bearings
• Ideal for heavy-duty conveyor drive components
• Can be used for rotating shafts in material handling systems
• Used for agricultural machinery transmission interfaces

It employs a cylindrical bore to mount directly onto straight shafts using conventional seating techniques.

The cone has a larger axial width than the cup, with the cone width at 32 mm and the cup width at 24.5 mm.

The static load capacity is 160 kN while the dynamic load capacity is 142 kN, indicating strong resistance to both standstill and running loads.

The bearing is rated for operation up to 7,000 r/min under appropriate lubrication and mounting conditions.

The outside diameter measures 90 mm and the inside diameter measures 50 mm for Interface dimensioning.