小計（1 件）*
TWD5,649.00
(不含稅)
TWD5,931.45
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月05日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD5,649.00 |
* 參考價格
- RS庫存編號:
- 208-0085
- 製造零件編號:
- 33016
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 182kN | |
| Bearing Material | Steel | |
| End Type | Shielded | |
| Limiting Speed | 5000rpm | |
| Cone Width | 36mm | |
| Number of Rows | 1 | |
| Cup Width | 29.5mm | |
| Static Load Rating | 304kN | |
| Outside Diameter | 125mm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 182kN | ||
Bearing Material Steel | ||
End Type Shielded | ||
Limiting Speed 5000rpm | ||
Cone Width 36mm | ||
Number of Rows 1 | ||
Cup Width 29.5mm | ||
Static Load Rating 304kN | ||
Outside Diameter 125mm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- FAG 33016 Taper Roller 80 mm ID Roller Bearing, 125 mm OD
- RS PRO 33016 Taper 80 mm ID Roller Bearing, 125 mm OD
- SKF 32016 X Taper 80 mm ID Roller Bearing, 125 mm OD
- SKF 30307 Taper Roller 35 mm ID Roller Bearing, 80 mm OD
- SKF 33214 Taper 70 mm ID Roller Bearing, 125 mm OD
- SKF 33010/Q Taper Roller 50 mm ID Roller Bearing, 80 mm OD
- SKF 30316 Taper Roller 80 mm ID Tapered Roller Bearing, 170 mm OD
- SKF 30307 Taper Roller 35 mm ID Tapered Roller Bearing, 80 mm OD