SKF 32313 BJ2/QU4CL7CVQ267 Taper 60 mm ID Roller Bearing, 140 mm OD
- RS庫存編號:
- 208-0068
- 製造零件編號:
- 32313 BJ2/QU4CL7CVQ267
- 製造商:
- SKF
小計（1 件）*
TWD16,027.00
(不含稅)
TWD16,828.35
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月07日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD16,027.00 |
* 參考價格
- RS庫存編號:
- 208-0068
- 製造零件編號:
- 32313 BJ2/QU4CL7CVQ267
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 60mm | |
| Bore Type | Parallel | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 305kN | |
| End Type | Shielded | |
| Cone Width | 51mm | |
| Limiting Speed | 4800rpm | |
| Series | 32313 B SKF Explorer | |
| Static Load Rating | 345kN | |
| Cup Width | 39mm | |
| Number of Rows | 1 | |
| Outside Diameter | 140mm | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 60mm | ||
Bore Type Parallel | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 305kN | ||
End Type Shielded | ||
Cone Width 51mm | ||
Limiting Speed 4800rpm | ||
Series 32313 B SKF Explorer | ||
Static Load Rating 345kN | ||
Cup Width 39mm | ||
Number of Rows 1 | ||
Outside Diameter 140mm | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- SKF 32313 Taper 65 mm ID Roller Bearing, 140 mm OD
- FAG 32313-A Taper Roller 65 mm ID Roller Bearing, 140 mm OD
- FAG 32313-BA Taper Roller 65 mm ID Roller Bearing, 140 mm OD
- SKF 32312 BJ2/QCL7C Taper 60 mm ID Roller Bearing, 130 mm OD
- SKF 32317 BJ2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 32309 BJ2/QCL7C Taper 45 mm ID Roller Bearing, 100 mm OD
- SKF 32205 BJ2/Q Taper 25 mm ID Roller Bearing, 52 mm OD
- SKF T4CB 140 Taper 140 mm ID Roller Bearing, 195 mm OD