小計（1 件）*
TWD2,545.00
(不含稅)
TWD2,672.25
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月19日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD2,545.00 |
* 參考價格
- RS庫存編號:
- 208-0062
- 製造零件編號:
- 32309
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 45mm | |
| Bore Type | Parallel | |
| Roller Material | Steel | |
| Cage Material | Pressed Steel | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 145kN | |
| Standards/Approvals | No | |
| Number of Rows | 1 | |
| Cone Width | 38.25mm | |
| Static Load Rating | 185kN | |
| Cup Width | 30mm | |
| Bearing Material | Steel | |
| Outside Diameter | 100mm | |
| Limiting Speed | 7000rpm | |
| Bearing Type | Taper | |
| Race Type | Tapered | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 45mm | ||
Bore Type Parallel | ||
Roller Material Steel | ||
Cage Material Pressed Steel | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 145kN | ||
Standards/Approvals No | ||
Number of Rows 1 | ||
Cone Width 38.25mm | ||
Static Load Rating 185kN | ||
Cup Width 30mm | ||
Bearing Material Steel | ||
Outside Diameter 100mm | ||
Limiting Speed 7000rpm | ||
Bearing Type Taper | ||
Race Type Tapered | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- SKF 32309 BJ2/QCL7C Taper 45 mm ID Roller Bearing, 100 mm OD
- FAG 32309-A Taper Roller 45 mm ID Roller Bearing, 100 mm OD
- RS PRO 32309 Taper 45 mm ID Roller Bearing, 100 mm OD
- SKF 30209 Taper 45 mm ID Roller Bearing, 85 mm OD
- SKF 33109 Taper 45 mm ID Roller Bearing, 80 mm OD
- SKF 32209 Taper 45 mm ID Roller Bearing, 85 mm OD
- SKF T2ED 045 Taper Roller 45 mm ID Roller Bearing, 95 mm OD
- SKF 31314 J2/QCL7ADF Taper 45 mm ID Roller Bearing, 100 mm OD