小計（1 件）*
TWD816.00
(不含稅)
TWD856.80
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 加上 1 件從 2026年5月04日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD816.00 |
* 參考價格
- RS庫存編號:
- 208-0055
- 製造零件編號:
- 32303
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Limiting Speed | 16000rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 35.4kN | |
| End Type | Shielded | |
| Outside Diameter | 47mm | |
| Static Load Rating | 34.3kN | |
| Cone Width | 20.25mm | |
| Bearing Material | Steel | |
| Cup Width | 16mm | |
| Number of Rows | 1 | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 17mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Limiting Speed 16000rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 35.4kN | ||
End Type Shielded | ||
Outside Diameter 47mm | ||
Static Load Rating 34.3kN | ||
Cone Width 20.25mm | ||
Bearing Material Steel | ||
Cup Width 16mm | ||
Number of Rows 1 | ||
Race Type Tapered | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- RS PRO 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- FAG 32303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 30303 Single Row Tapered Roller 17 mm ID Taper Roller Bearing, 47 mm OD
- SNR 30303A Taper Roller 17 mm ID Tapered Roller Bearing, 47 mm OD
- NTN 4T-30303 Taper Roller 17 mm ID Roller Bearing, 47 mm OD
- FAG 30303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 30203 Taper 17 mm ID Roller Bearing, 40 mm OD
- SKF 32005X/Q Taper 25 mm ID Roller Bearing, 47 mm OD