SKF 32011 X Taper 55 mm ID Roller Bearing, 90 mm OD

小計(1 件)*

TWD1,160.00

(不含稅)

TWD1,218.00

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 22 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD1,160.00

* 參考價格

RS庫存編號:
208-0020
製造零件編號:
32011 X
製造商:
SKF
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

SKF

Product Type

Roller Bearing

Inside Diameter

55mm

Bore Type

Parallel

Number of Rows

1

Cone Width

23mm

Static Load Rating

116kN

Outside Diameter

90mm

Cup Width

17.5mm

End Type

Shielded

Standards/Approvals

No

Bearing Dynamic Load Rating

99.4kN

Limiting Speed

7000rpm

Bearing Type

Taper

COO (Country of Origin):
DE

SKF Tapered Roller Bearing, 55 mm ID - 32011 X


Achieve true rolling action and minimal friction with this single-row, tapered roller bearing from SKF. The product's design enables both radial and axial load bearing simultaneously. These bearings offer great versatility too, as the components are interchangeable. The inner ring with its roller and cage assembly (cone) can be mounted separately from the outer ring (cup), allowing easy dismounting for routine servicing or maintenance inspections. For oscillating applications, a rigid bearing can be achieved by adjusting a single-row, tapered roller against a second unit and applying a pre-load.

• Parallel bore type

• Inside diameter of 55 mm

• Outside diameter of 90 mm

• Race width of 23 mm

Application Information


• Industrial automation

• Domestic appliances

The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.

What's the purpose of a rigid bearing?


Low friction

Enhanced operational reliability

Rigid bearing application

A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.

Running-in period with reduced temperature peaks

Separable and interchangeable

The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.

Rigid bearings are necessary when oscillating movement is required. This is of particular importance where weight limitations or clearance areas are a consideration.

Why should I use tapered roller bearings?


Tapered bearings cut friction which means greater reliability and lower maintenance costs. Service life is long too, thanks to even load distribution and reduced stress peaks.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。