SKF 31316 J1/QCL7A Taper 80 mm ID Roller Bearing, 170 mm OD
- RS庫存編號:
- 208-0015
- 製造零件編號:
- 31316 J1/QCL7A
- 製造商:
- SKF
小計（1 件）*
TWD15,465.00
(不含稅)
TWD16,238.25
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年6月05日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD15,465.00 |
* 參考價格
- RS庫存編號:
- 208-0015
- 製造零件編號:
- 31316 J1/QCL7A
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 80mm | |
| Bore Type | Parallel | |
| Limiting Speed | 4000rpm | |
| Cone Width | 42.5mm | |
| Number of Rows | 1 | |
| Series | 7 GB | |
| Static Load Rating | 265kN | |
| Outside Diameter | 170mm | |
| Bearing Dynamic Load Rating | 276kN | |
| End Type | Shielded | |
| Standards/Approvals | No | |
| Cup Width | 27mm | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 80mm | ||
Bore Type Parallel | ||
Limiting Speed 4000rpm | ||
Cone Width 42.5mm | ||
Number of Rows 1 | ||
Series 7 GB | ||
Static Load Rating 265kN | ||
Outside Diameter 170mm | ||
Bearing Dynamic Load Rating 276kN | ||
End Type Shielded | ||
Standards/Approvals No | ||
Cup Width 27mm | ||
Bearing Type Taper | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- SKF 31316 J1/QCL7ADF Taper Roller 80 mm ID Tapered Roller Bearing, 170 mm OD
- SKF 30316 Taper Roller 80 mm ID Tapered Roller Bearing, 170 mm OD
- SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF C 2316 K/C3 Taper 80 mm ID Roller Bearing, 170 mm OD
- NTN 30316DU Taper Roller 80 mm ID Roller Bearing, 170 mm OD
- NTN 30316U Taper Roller 80 mm ID Roller Bearing, 170 mm OD
- NTN 32316U Taper Roller 80 mm ID Roller Bearing, 170 mm OD
- FAG 32316-A Taper Roller 80 mm ID Roller Bearing, 170 mm OD