小計（1 件）*
TWD7,360.00
(不含稅)
TWD7,728.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年9月25日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD7,360.00 |
* 參考價格
- RS庫存編號:
- 207-9988
- 製造零件編號:
- 30221
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 105mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Outside Diameter | 190mm | |
| Static Load Rating | 368kN | |
| Cup Width | 30mm | |
| Number of Rows | 1 | |
| Cone Width | 40mm | |
| Bearing Material | Steel | |
| Standards/Approvals | No | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 282kN | |
| Limiting Speed | 3400rpm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 105mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Outside Diameter 190mm | ||
Static Load Rating 368kN | ||
Cup Width 30mm | ||
Number of Rows 1 | ||
Cone Width 40mm | ||
Bearing Material Steel | ||
Standards/Approvals No | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 282kN | ||
Limiting Speed 3400rpm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
相關連結
- FAG 30221-A Taper Roller 105 mm ID Roller Bearing, 190 mm OD
- RS PRO 30221 Taper 105 mm ID Roller Bearing, 190 mm OD
- SKF 32221 Taper 105 mm ID Roller Bearing, 190 mm OD
- NTN 32221U Taper Roller 105 mm ID Roller Bearing, 190 mm OD
- SKF 31318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 32318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 32938 Taper 190 mm ID Roller Bearing, 260 mm OD
- SKF 30318 Taper 90 mm ID Roller Bearing, 190 mm OD