小計（1 件）*
TWD3,374.00
(不含稅)
TWD3,542.70
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 16 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD3,374.00 |
* 參考價格
- RS庫存編號:
- 207-8765
- 製造零件編號:
- NKX 25 Z
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 30mm | |
| Bore Type | Round | |
| Roller Material | Steel | |
| Standards/Approvals | ISO - F6 (Fw) + E8 (d) | |
| Number of Rows | 1 | |
| Limiting Speed | 5500rpm | |
| Static Load Rating | 32.5kN | |
| Dynamic Load Rating | 19kN | |
| Outside Diameter | 43.2mm | |
| Series | NKX 25 Z | |
| Bearing Material | Steel | |
| Bearing Type | Needle | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 30mm | ||
Bore Type Round | ||
Roller Material Steel | ||
Standards/Approvals ISO - F6 (Fw) + E8 (d) | ||
Number of Rows 1 | ||
Limiting Speed 5500rpm | ||
Static Load Rating 32.5kN | ||
Dynamic Load Rating 19kN | ||
Outside Diameter 43.2mm | ||
Series NKX 25 Z | ||
Bearing Material Steel | ||
Bearing Type Needle | ||
SKF Roller Bearing, Combined Needle Roller And Sealed Thrust Ball Bearing, 25mm ID, 43.2mm OD - NKX 25 Z
Looking for a bearing that can cope with high turning speeds? This roller bearing from SKF is just the thing. By slipping this unit on a 25mm-wide axle, you get a nifty assembly that can move at up to 5,500r/min. As this clever device combines needle and ball rolling elements, it breezes through tasks that involve radial and axial loads in one direction. It's made of strong steel, so it holds its own against bumps, abrasion and contamination.
Features & Benefits
• Light weight of 130g minimises strain on your setup
• Stamped steel cover on the ball bearing seals the grease in to ensure smooth and reliable motion
• Low cross-sectional height of 43.2mm lets you use it in tight or awkward spaces
• Needle roller bearing design minimises friction to cut wear and heat generation
• Combined unit is suitable for use in settings where a separate needle and ball bearing would take up too much space
Applications
• Agricultural equipment
• Lifts and hoists
• Automotive technology
Does this roller bearing withstand heavy loads?
Yes. The basic dynamic rating of this product is 19kN for radial forces and 19.5kN for axial ones, so it's reliable under heavy loads.
相關連結
- SKF NKX 35 Z 35 mm ID Needle Roller Bearing Thrust Ball 47 mm OD
- SKF NKX 70 Z 70 mm ID Roller Bearing Needle, 95 mm OD
- SKF NKX 50 Z 50 mm ID Roller Bearing Needle, 70 mm OD
- SKF NKX 30 Z 30 mm ID Combined Needle Roller & Thrust Ball Bearing Needle, 42 mm OD
- SKF NKX 60 Z 60 mm ID Roller Bearing Thrust Ball 72 mm OD
- SKF NKX 40 Z 40 mm ID Roller Bearing Needle Roller 52 mm OD
- SKF NKX 45 Z 45 mm ID Roller Bearing Thrust Ball 58 mm OD
- SKF NKX 12 Z 12 mm ID Roller Bearing Needle Roller 21 mm OD