SKF NJ 2311 ECP/C3 55 mm ID Roller Bearing, 12 mm OD
- RS庫存編號:
- 195-9698
- 製造零件編號:
- NJ 2311 ECP/C3
- 製造商:
- SKF
可享批量折扣
小計（1 件）*
TWD9,077.00
(不含稅)
TWD9,530.85
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD9,077.00 |
| 13 - 24 | TWD8,714.00 |
| 25 + | TWD8,532.00 |
* 參考價格
- RS庫存編號:
- 195-9698
- 製造零件編號:
- NJ 2311 ECP/C3
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Race Width | 43mm | |
| Bore Type | Cylindrical | |
| Outside Diameter | 12mm | |
| Dynamic Load Rating | 232kN | |
| Number of Rows | 1 | |
| End Type | Open | |
| Standards/Approvals | No | |
| Series | NJ 2311 ECP | |
| Limiting Speed | 7000rpm | |
| Static Load Rating | 232kN | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Race Width 43mm | ||
Bore Type Cylindrical | ||
Outside Diameter 12mm | ||
Dynamic Load Rating 232kN | ||
Number of Rows 1 | ||
End Type Open | ||
Standards/Approvals No | ||
Series NJ 2311 ECP | ||
Limiting Speed 7000rpm | ||
Static Load Rating 232kN | ||
豁免
Single row cylindrical roller bearings
SKF single row cylindrical roller bearings are available in many designs, series and sizes.
Features:
C3 Clearance on this model.
High load carrying capacity
High stiffness
Accommodate axial displacement
Except for bearings with flanges on both the inner and outer rings.
Low friction
The open flange design,
together with the roller end design and surface finish, promote lubricant film formation resulting in lower friction and higher axial load carrying capability.
Long service life
The logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection.
Enhanced operational reliability
The surface finish on the contact surfaces of the rollers and raceways supports the formation of a hydrodynamic lubricant film.
Separable and interchangeable
The separable components of SKF cylindrical roller bearings are interchangeable. This facilitates mounting and dismounting, as well as maintenance inspections.
相關連結
- SKF NJ 2311 ECP 55 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NJ 2311 ECP/C4 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 2311 ECML/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NU 2311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 213 ECP/C3 65 mm ID Roller Bearing, 120 mm OD
- SKF NJ 311 ECP/C3 55 mm ID Roller Bearing, 120 mm OD
- SKF NJ 2213 ECP/C3 65 mm ID Cylindrical Roller Bearing, 120 mm OD
- SKF NU 2311 ECML/C3, 120 mm OD