可享批量折扣
小計（1 件）*
TWD7,035.00
(不含稅)
TWD7,386.75
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年6月11日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD7,035.00 |
| 5 - 9 | TWD6,753.00 |
| 10 + | TWD6,613.00 |
* 參考價格
- RS庫存編號:
- 194-7342
- 製造零件編號:
- NK100/26-XL
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 120mm | |
| Race Width | 26mm | |
| Bore Type | Parallel | |
| Static Load Rating | 146kN | |
| Outside Diameter | 120mm | |
| Dynamic Load Rating | 86kN | |
| End Type | Open | |
| Standards/Approvals | No | |
| Bearing Type | Needle | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 120mm | ||
Race Width 26mm | ||
Bore Type Parallel | ||
Static Load Rating 146kN | ||
Outside Diameter 120mm | ||
Dynamic Load Rating 86kN | ||
End Type Open | ||
Standards/Approvals No | ||
Bearing Type Needle | ||
The Bearings can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
相關連結
- INA NK100/36-XL 120 mm ID Roller Bearing Needle, 120 mm OD
- NTN NK100/26R 100 mm ID Needle Roller Bearing Needle, 120 mm OD
- INA NK18/20-XL 26 mm ID Roller Bearing Needle, 26 mm OD
- NTN NK100/36R 100 mm ID Roller Bearing Machined-ring 120 mm OD
- INA NK95/26-XL 95 mm ID Roller Bearing Needle, 95 mm OD
- INA NK18/16-XL 18 mm ID Roller Bearing Needle, 26 mm OD
- INA NKX17-Z-XL 17 mm ID Roller Bearing Needle, 26 mm OD
- INA NK26/20-XL 26 mm ID Roller Bearing Needle, 34 mm OD