可享批量折扣
小計（1 件）*
TWD15,430.00
(不含稅)
TWD16,201.50
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年6月18日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 4 | TWD15,430.00 |
| 5 - 9 | TWD14,812.00 |
| 10 + | TWD14,503.00 |
* 參考價格
- RS庫存編號:
- 194-6843
- 製造零件編號:
- 81220-TV
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 100mm | |
| Race Width | 38mm | |
| Bore Type | Parallel | |
| Dynamic Load Rating | 340kN | |
| End Type | Open | |
| Standards/Approvals | No | |
| Static Load Rating | 1080kN | |
| Outside Diameter | 150mm | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 100mm | ||
Race Width 38mm | ||
Bore Type Parallel | ||
Dynamic Load Rating 340kN | ||
End Type Open | ||
Standards/Approvals No | ||
Static Load Rating 1080kN | ||
Outside Diameter 150mm | ||
Single and double row axial cylindrical roller bearings are particularly suitable where:
High axial and shock loads occur in one direction but no radial loads are present
The load carrying capacity of the corresponding axial deep groove ball bearings is no longer adequate (in this case, bearings of series 811 and 812 are especially suitable)
The bearing arrangement must have very high axial rigidity
The axial space available is very small
The bearing arrangement can be configured, where the axial space is very small, as a direct bearing arrangement
The bearing parts can or must be mounted separately
The bearing arrangement is not configured in itself but, for cost reasons, ready-to-fit standard bearings are to be used
相關連結
- NTN 81220 Needle Roller 150 mm OD
- INA 81102-TV 15 mm ID Roller Bearing, 28 mm OD
- INA 81103-TV 17 mm ID Roller Bearing, 30 mm OD
- INA 81107-TV 35 mm ID Roller Bearing, 52 mm OD
- INA 81108-TV 40 mm ID Roller Bearing, 60 mm OD
- INA 81109-TV 45 mm ID Roller Bearing, 65 mm OD
- INA 81206-TV 30 mm ID Roller Bearing, 52 mm OD
- INA 81208-TV 40 mm ID Roller Bearing, 68 mm OD