可享批量折扣
小計（1 件）*
TWD2,223.00
(不含稅)
TWD2,334.15
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD2,223.00 |
| 13 - 24 | TWD2,159.00 |
| 25 + | TWD2,131.00 |
* 參考價格
- RS庫存編號:
- 191-4436
- 製造零件編號:
- NKIA5904-XL
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 20mm | |
| Race Width | 23mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| End Type | Open | |
| Dynamic Load Rating | 23.7kN | |
| Outside Diameter | 37mm | |
| Standards/Approvals | No | |
| Static Load Rating | 25.5kN | |
| Bearing Type | Needle | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 20mm | ||
Race Width 23mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
End Type Open | ||
Dynamic Load Rating 23.7kN | ||
Outside Diameter 37mm | ||
Standards/Approvals No | ||
Static Load Rating 25.5kN | ||
Bearing Type Needle | ||
Can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements