可享批量折扣
小計（1 件）*
TWD1,425.00
(不含稅)
TWD1,496.25
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年6月18日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD1,425.00 |
| 13 - 24 | TWD1,368.00 |
| 25 + | TWD1,339.00 |
* 參考價格
- RS庫存編號:
- 191-4411
- 製造零件編號:
- NK43/20-XL
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 43mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Static Load Rating | 51kN | |
| Dynamic Load Rating | 30.5kN | |
| Outside Diameter | 53mm | |
| Standards/Approvals | No | |
| End Type | Open | |
| Bearing Type | Needle | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 43mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Static Load Rating 51kN | ||
Dynamic Load Rating 30.5kN | ||
Outside Diameter 53mm | ||
Standards/Approvals No | ||
End Type Open | ||
Bearing Type Needle | ||
Can support high to very high radial forces
Are used when the load carrying capacity or accuracy of drawn cup needle roller bearings with open ends is no longer sufficient and the high load capacity of cylindrical roller bearings is not yet required
Can only support radial loads and, as a result, are highly suitable for use as non-locating bearings (they permit axial displacement of the shaft relative to the housing in the bearing)
Permit high speeds in spite of line contact
Compensate misalignments between the shaft and housing (aligning needle roller bearings)
Require only a very small radial design envelope, particularly if the bearing arrangement is designed without an inner ring
Are available in numerous sizes and designs
Result in particularly compact, cost-effective and economical bearing arrangements
相關連結
- INA NK43/30-XL 53 mm ID Roller Bearing Needle, 53 mm OD
- NTN NK43/30R 43 mm ID Roller Bearing Needle Roller, 53 mm OD
- NTN NK43/20R 43 mm ID Roller Bearing Machined-ring 53 mm OD
- NTN NK43/30R+1R38X43X30 38 mm ID Roller Bearing Machined-ring 53 mm OD
- NTN NK43/20R+1R38X43X20 38 mm ID Roller Bearing Machined-ring 53 mm OD
- INA NA4914-XL 70 mm ID Needle Roller Bearing Needle Roller, 100 mm OD
- INA NKS35-XL 35 mm ID Needle Roller Bearing Needle Roller, 50 mm OD
- INA NK19/16-XL 19 mm ID Needle Roller Bearing Needle Roller, 27 mm OD