小計（1 件）*
TWD3,896.00
(不含稅)
TWD4,090.80
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年5月08日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD3,896.00 |
* 參考價格
- RS庫存編號:
- 190-8364
- 製造零件編號:
- 31310-A
- 製造商:
- FAG
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Outside Diameter | 110 mm | |
| Static Load Rating | 125kN | |
| Cone Width | 29.25mm | |
| End Type | Open | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 111 KN | |
| Bearing Type | Taper | |
| 選取全部 | ||
|---|---|---|
品牌 FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 50 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Outside Diameter 110 mm | ||
Static Load Rating 125kN | ||
Cone Width 29.25mm | ||
End Type Open | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 111 KN | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
相關連結
- SKF 31310/CL7C Taper 50 mm ID Roller Bearing, 110 mm OD
- FAG 32310-B Taper Roller 50 mm ID Tapered Roller Bearing, 110 mm OD
- FAG 30310-A Taper 50 mm ID Roller Bearing, 110 mm OD
- FAG 33212 Taper Roller 60 mm ID Roller Bearing, 110 mm OD
- FAG 33122 Taper Roller 110 mm ID Roller Bearing, 180 mm OD
- FAG 33022 Taper Roller 110 mm ID Roller Bearing, 170 mm OD
- FAG 33014 Taper 70 mm ID Roller Bearing, 110 mm OD
- FAG 32922 Taper Roller 110 mm ID Tapered Roller Bearing, 150 mm OD