INA HK2520-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- RS庫存編號:
- 137-1766
- 製造零件編號:
- HK2520-B
- 製造商:
- INA
可享批量折扣
小計（1 件）*
TWD311.00
(不含稅)
TWD326.55
(含稅)
庫存資訊目前無法存取 - 請稍後再回來查看
單位 | 每單位 |
|---|---|
| 1 - 12 | TWD311.00 |
| 13 - 24 | TWD300.00 |
| 25 + | TWD296.00 |
* 參考價格
- RS庫存編號:
- 137-1766
- 製造零件編號:
- HK2520-B
- 製造商:
- INA
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | INA | |
| Product Type | Roller Bearing | |
| Inside Diameter | 25mm | |
| Race Width | 20mm | |
| Bore Type | Parallel | |
| Cage Material | Sheet Steel | |
| Dynamic Load Rating | 19900N | |
| Outside Diameter | 32mm | |
| Number of Rows | 1 | |
| End Type | Open | |
| Static Load Rating | 33000N | |
| Standards/Approvals | No | |
| Limiting Speed | 10200rpm | |
| Maximum Speed - Oil | 10200rpm | |
| Maximum Speed - Grease | 6100rpm | |
| Bearing Type | Drawn Cup Needle | |
| 選取全部 | ||
|---|---|---|
品牌 INA | ||
Product Type Roller Bearing | ||
Inside Diameter 25mm | ||
Race Width 20mm | ||
Bore Type Parallel | ||
Cage Material Sheet Steel | ||
Dynamic Load Rating 19900N | ||
Outside Diameter 32mm | ||
Number of Rows 1 | ||
End Type Open | ||
Static Load Rating 33000N | ||
Standards/Approvals No | ||
Limiting Speed 10200rpm | ||
Maximum Speed - Oil 10200rpm | ||
Maximum Speed - Grease 6100rpm | ||
Bearing Type Drawn Cup Needle | ||
Drawn Cup Needle Roller Bearings
INA from Schaeffler drawn cup needle roller bearings with open ends and closed ends are bearings with a small radial section height. They comprise thin-walled, drawn cup outer rings and needle roller and cage assemblies which together form a complete unit.;Most the bearings are of a single row design and do not have a lubrication hole. Double row designs have a lubrication hole and the suffix ZW.
Features and Benefits
• Lower operating costs;• Reduced maintenance due to improved lubrication;• Lower heat generation;• Less noise
Product Application Information
These bearings allow the design of compact and easy‑to‑fit bearing arrangements with high radial load carrying capacity.;Drawn cup needle roller bearings require a hardened and ground bearing raceway on the shaft.
Suffixes
2RS - Contact seals on both sides;RS - Contact seal on one side;ZW - Double row design, with lubrication hole
INA
相關連結
- INA HK2520-2RS-L271 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- NTN HK2520 25 mm ID Needle Roller Thrust Bearing Drawn Cup Needle Roller, 32 mm OD
- INA HK2512-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK2516-B 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK3220-B 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK2526 25 mm ID Roller Bearing Drawn Cup Needle, 32 mm OD
- INA HK3224 32 mm ID Roller Bearing Drawn Cup Needle, 39 mm OD
- INA HK0606-B 6 mm ID Roller Bearing Drawn Cup Needle, 10 mm OD