SKF NK50/35TN 50 mm ID Roller Bearing Needle, 62 mm OD
- RS庫存編號:
- 513-773
- 製造零件編號:
- NK50/35TN
- 製造商:
- SKF
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 件）*
TWD1,622.00
(不含稅)
TWD1,703.10
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 從 2026年10月26日 發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 5 | TWD1,622.00 |
| 6 - 11 | TWD1,592.00 |
| 12 + | TWD1,557.00 |
* 參考價格
- RS庫存編號:
- 513-773
- 製造零件編號:
- NK50/35TN
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Race Width | 35mm | |
| Bore Type | Parallel | |
| Cage Material | Reinforced Nylon | |
| Roller Material | Carbon Chrome Steel | |
| Outside Diameter | 62mm | |
| Static Load Rating | 110kN | |
| Bearing Material | Carbon Chromium Steel | |
| Limiting Speed | 9000rpm | |
| Maximum Speed - Grease | 5600rpm | |
| Standards/Approvals | ISO 199:1997, ISO 14001, ISO 5753:1991, ISO 1000:1992, DIN 17 230:1980, ISO 582:1995, ISO 492:1994 | |
| Dynamic Load Rating | 49.5kN | |
| End Type | Open | |
| Maximum Speed - Oil | 8000rpm | |
| Bearing Type | Needle | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Race Width 35mm | ||
Bore Type Parallel | ||
Cage Material Reinforced Nylon | ||
Roller Material Carbon Chrome Steel | ||
Outside Diameter 62mm | ||
Static Load Rating 110kN | ||
Bearing Material Carbon Chromium Steel | ||
Limiting Speed 9000rpm | ||
Maximum Speed - Grease 5600rpm | ||
Standards/Approvals ISO 199:1997, ISO 14001, ISO 5753:1991, ISO 1000:1992, DIN 17 230:1980, ISO 582:1995, ISO 492:1994 | ||
Dynamic Load Rating 49.5kN | ||
End Type Open | ||
Maximum Speed - Oil 8000rpm | ||
Bearing Type Needle | ||
豁免
- COO (Country of Origin):
- DE
SKF Machine Needle Roller Bearings Series NK
SKF Needle Roller Bearings have low sectional height and very high load carrying capacity for their size.
Needle roller without inner ring
Needle Roller Bearings with flanges in the outer ring and diameters up to and including 17mm are produced with inserted closure rings, are without lubrication and do not have an annular groove
The larger bearings have integral flanges, an annular groove and, depending on size, one or more lubrication holes in the outer ring
Can be used where the shaft is hardened and ground, the bearing runs on the shaft
Displacement is limited to the width of the raceway
相關連結
- NTN NK50/25RCT 50 mm ID Needle Roller Thrust Bearing Needle Roller 62 mm OD
- NTN NK50/35R 50 mm ID Roller Bearing Machined-ring 62 mm OD
- INA NK50/25-TV-XL 50 mm ID Roller Bearing Needle, 62 mm OD
- INA NK50/35-TV-XL 50 mm ID Roller Bearing Needle, 62 mm OD
- NTN NK50/35R+1R45X50X35 45 mm ID Roller Bearing Needle Roller, 62 mm OD
- NTN NK50/25RCT+1R45X50X25 45 mm ID Needle Roller Thrust Bearing Needle Roller 62 mm OD
- SKF NKXR 50 Z 50 mm ID Roller Bearing Needle Roller, 62 mm OD
- SKF NKX 50 50 mm ID Roller Bearing Thrust Ball 62 mm OD