小計（1 件）*
TWD1,415.00
(不含稅)
TWD1,485.75
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD1,415.00 |
* 參考價格
- RS庫存編號:
- 232-2781
- 製造零件編號:
- SIKB 10 F
- 製造商:
- SKF
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SKF | |
| Product Type | Rod End | |
| Connection Size | M10 Female | |
| Bore Size | 10mm | |
| Material | Steel | |
| Dynamic Load Rating | 9.8kN | |
| Static Load Rating | 14.3kN | |
| Thread Standard | Metric | |
| Overall Width | 29mm | |
| Standards/Approvals | No | |
| Thread Direction | Right Hand | |
| 選取全部 | ||
|---|---|---|
品牌 SKF | ||
Product Type Rod End | ||
Connection Size M10 Female | ||
Bore Size 10mm | ||
Material Steel | ||
Dynamic Load Rating 9.8kN | ||
Static Load Rating 14.3kN | ||
Thread Standard Metric | ||
Overall Width 29mm | ||
Standards/Approvals No | ||
Thread Direction Right Hand | ||
- COO (Country of Origin):
- DE
SKF Rod End, 10mm Bore Diameter, 59mm Housing Length, Steel Material, 13° Tilt Angle - SIKB 10 F
Keep joints in your rotating system smooth and supported with this rod end from SKF. It features a sliding layer made of steel and PTFE FRP that stops wear and corrosion in their tracks, so it doesn't need any maintenance. You can trust it to bear up in light-duty and medium-duty applications, as it handles dynamic loads up to 9.8kN and static loads up to 14.3kN. A standard M10 thread size makes the unit a breeze to fit with commonly used parts.
• Bearing steel inner ring is resistant to wear and corrosion
• Angle tilt of 13° tolerates misalignment for hassle-free operation
Applications
• Aviation engineering
• Robotics systems
• Manufacturing equipment
The SKF Rod ends with a female thread has 10mm bore diameter. It has wrench size 17 mm.
What's the difference between steel and bearing steel?
Width inner ring 14 mm
Width head 11.5 mm
Angle of tilt 13 Deg
Bearing steel is heat-treated and has a higher carbon content than regular steel, so it's more durable. This means it can take on more demanding jobs with minimal wear and tear.
What size wrench do I need to tighten this rod end in place?
You can use a standard 17mm wrench to ensure your rod end is securely fastened in place.
相關連結
- SKF M10 Male Steel Rod End Metric, 10 mm Bore
- SKF M10 Female Steel Rod End, 10 mm Bore Metric
- SKF M6 Steel Rod End, 6 mm Bore Metric
- SKF M5 Female Steel Rod End, 5 mm Bore Metric
- SKF M12 Female Steel Rod End, 12 mm Bore Metric
- SKF M8 Female Steel Rod End, 8 mm Bore Metric
- SKF M14 Female Steel Rod End, 14 mm Bore Metric
- SKF M16 Female Steel Rod End, 16 mm Bore Metric