INA M35 x 1.5 in Steel Rod End, 40mm Bore Metric

RS庫存編號:: 312-945
製造零件編號:: GIHRK40-DO-B
製造商:: INA

INA M35 x 1.5 in Steel Rod End, 40mm Bore Metric

查看所有Rod Ends

小計（1 件）*

TWD7,611.00

(不含稅)

TWD7,991.55

(含稅)

訂單超過 $1,300.00 免費送貨

製造商存貨

準備從 2026年11月25日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD7,611.00

* 參考價格

RS庫存編號:: 312-945
製造零件編號:: GIHRK40-DO-B
製造商:: INA

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	INA
	Product Type	Rod End
	Connection Size	M35 x 1.5 in
	Bore Diameter	40mm
	Material	Steel
	Dynamic Load Rating	127000N
	Thread Standard	Metric
	Static Load Rating	228000N
	Minimum Operating Temperature	-60°C
	Connection Gender	Female
	Maximum Operating Temperature	+200°C
	Outside Diameter	62mm
	Overall Width	135mm
	Standards/Approvals	No
	Thread Direction	Right Hand

	選取全部
	品牌 INA
	Product Type Rod End
	Connection Size M35 x 1.5 in
	Bore Diameter 40mm
	Material Steel
	Dynamic Load Rating 127000N
	Thread Standard Metric
	Static Load Rating 228000N
	Minimum Operating Temperature -60°C
	Connection Gender Female
	Maximum Operating Temperature +200°C
	Outside Diameter 62mm
	Overall Width 135mm
	Standards/Approvals No
	Thread Direction Right Hand

Datasheet - GIHRK40-DO-B

豁免

COO (Country of Origin):: DE

Schaeffler Rod End, 62mm Outside Diameter, Steel - GIHRK40-DO-B

This rod end is a precision mechanical joint designed to transmit loads and permit angular misalignment in linking assemblies. It is constructed in steel for structural strength and is intended for use where robust axial and lateral load handling is required across a wide temperature range. The component incorporates a metric right-hand threaded connection and a central bore to accept mating shafts or pins.

Features and Benefits:

• Static load capacity 228000N delivers high axial resistance
• Dynamic load rating 127000N supports cyclical loading conditions
• Operable from -60°C to +200°C endures extreme temperature variation
• Metric M35 x 1.5 connection allows standard threaded integration
• Right-hand thread simplifies conventional installation procedures

Applications

• Suitable for heavy machinery pivot connections
• Ideal for linkage assemblies in thermal environments
• Used with shafts requiring a 40mm bore fit
• Can be used for load-bearing joints in fabrication
• Suitable for systems needing a 62mm external Interface

What is the internal mating size required for pin installation?

The internal aperture accepts a 40mm diameter shaft or pin.

Which thread specification should the mating component provide?

The mating part must match an M35 x 1.5 metric right-hand thread.

What material characteristics affect wear and strength?

The body is MADE from steel, providing structural rigidity and load endurance.

How wide is the component across the bearing assembly?

The overall width measures 135mm.