onsemi KA7552A 5 PWM Controller, 600 kHz 30V 8-Pin, PDIP
- RS庫存編號:
- 862-9375
- 製造零件編號:
- KA7552A
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 10 件）*
TWD220.00
(不含稅)
TWD231.00
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 240 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 10 | TWD22.00 | TWD220.00 |
| 20 - 20 | TWD21.50 | TWD215.00 |
| 30 + | TWD21.10 | TWD211.00 |
* 參考價格
- RS庫存編號:
- 862-9375
- 製造零件編號:
- KA7552A
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Maximum Switching Frequency | 600kHz | |
| Product Type | PWM Controller | |
| Start-up Supply Current | 15mA | |
| Supply Current | 1.8mA | |
| Output Current | 1.5A | |
| Zero Power Detection | No | |
| Mount Type | Through Hole | |
| Package Type | PDIP | |
| Minimum Supply Voltage | 8.2V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 30V | |
| Minimum Operating Temperature | -25°C | |
| Maximum Duty Cycle | 74% | |
| Maximum Operating Temperature | 85°C | |
| PWM Controller Type | SMPS | |
| Standards/Approvals | RoHS | |
| Series | KA755 | |
| Length | 9.6mm | |
| Height | 3.4mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Maximum Switching Frequency 600kHz | ||
Product Type PWM Controller | ||
Start-up Supply Current 15mA | ||
Supply Current 1.8mA | ||
Output Current 1.5A | ||
Zero Power Detection No | ||
Mount Type Through Hole | ||
Package Type PDIP | ||
Minimum Supply Voltage 8.2V | ||
Pin Count 8 | ||
Maximum Supply Voltage 30V | ||
Minimum Operating Temperature -25°C | ||
Maximum Duty Cycle 74% | ||
Maximum Operating Temperature 85°C | ||
PWM Controller Type SMPS | ||
Standards/Approvals RoHS | ||
Series KA755 | ||
Length 9.6mm | ||
Height 3.4mm | ||
Automotive Standard No | ||
PWM (Pulse Width Modulation) Controllers, Fairchild Semiconductor
Off-Line & Isolated DC-DC Controllers, Fairchild Semiconductor
The Flyback controllers, Line Level Control (LLC) controllers, and Primary-Side Regulation controllers offer Crucial energy savings to address the needs of Switch Mode Power Supply (SMPS) designs.
All controllers come with integrated soft-start, and protection features from over-voltage, open-feedback, overload, output-short, overcurrent, voltage brownout, and Undervoltage-Lockout.