Microchip 32-Pin, VQFN MIC2133YML-TR PWM Controller, 1 MHz, 75V, Surface

RS庫存編號:: 249-2462
製造零件編號:: MIC2133YML-TR
製造商:: Microchip

Microchip 32-Pin, VQFN MIC2133YML-TR PWM Controller, 1 MHz, 75V, Surface

此圖片僅供參考，請參閲產品詳細資訊及規格

暫時無法供應

我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。

RS庫存編號:: 249-2462
製造零件編號:: MIC2133YML-TR
製造商:: Microchip

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Microchip
	Product Type	PWM Controller
	Maximum Switching Frequency	1MHz
	Start-up Supply Current	0.0017mA
	Supply Current	8mA
	Output Voltage	28V
	Mount Type	Surface
	Minimum Supply Voltage	8V
	Package Type	VQFN
	Pin Count	32
	Maximum Supply Voltage	75V
	Topology	Buck
	Minimum Operating Temperature	-40°C
	Maximum Duty Cycle	50%
	Maximum Operating Temperature	125°C
	Length	5mm
	Height	0.9mm
	Series	MIC2133
	Standards/Approvals	RoHS
	Width	5mm
	Automotive Standard	AEC-Q100

	選取全部
	品牌 Microchip
	Product Type PWM Controller
	Maximum Switching Frequency 1MHz
	Start-up Supply Current 0.0017mA
	Supply Current 8mA
	Output Voltage 28V
	Mount Type Surface
	Minimum Supply Voltage 8V
	Package Type VQFN
	Pin Count 32
	Maximum Supply Voltage 75V
	Topology Buck
	Minimum Operating Temperature -40°C
	Maximum Duty Cycle 50%
	Maximum Operating Temperature 125°C
	Length 5mm
	Height 0.9mm
	Series MIC2133
	Standards/Approvals RoHS
	Width 5mm
	Automotive Standard AEC-Q100

Datasheet - MIC2133YML-TR

The Microchip constant on-time, dual phase, synchronous buck controller featuring a unique adaptive on-time control architecture with HyperLight Load® and phase shedding features enabled. It operates over an input supply range from 4.5V to 36V and can be used to supply up to 50A of output current. The output voltage is adjustable down to 0.6V with an ensured accuracy of ±1%.

0.6V internal reference with ±1% accuracy

Novel ripple injection method to allow greater than 50% duty cycle operation

Secondary LDO to improve system efficiency

Droop feature to support adaptive voltage positioning (AVP) for improved load transient response

Product Features

Input Voltage Range: 4.5V to 75V

Input Down to 2V when VDD = 5V from External Supply

Adjustable Output Voltage from 0.6V to 28V

0.6V Internal Reference with ±1% Accuracy

±0.5% Reference Accuracy for -40°C to 105°C

HyperLight Load® and Automatic Phase Shedding

100 kHz to 1 MHz Switching Frequency per Phase

High-Voltage Internal 5V LDO for Single-Supply Operation

Droop Feature to Support Adaptive Voltage Positioning (AVP)

Programmable Current Limit and Hiccup Mode Short-Circuit Protection

Thermal Shutdown with Hysteresis

-40°C to +125°C Junction Temperature Range

Programmable Current Limit and Hiccup Mode Short-Circuit Protection

Remote Sense Amplifier for Tight Output Regulation

Supports Start-up to Pre-Bias Output

External Programmable Soft Start to Reduce Inrush Current

Accurate Current Balancing Between Phases

Compact Size 5 mm x 5 mm 32-Pin VQFN Package

Microchip 32-Pin, VQFN MIC2133YML-TR PWM Controller, 1 MHz, 75V, Surface

Product Features

相關連結

第一時間了解我們的最新產品和優惠