DiodesZetex AP31251W6-7 PWM Controller, 65 kHz 25V 6-Pin, SOT-26
- RS庫存編號:
- 246-7431
- 製造零件編號:
- AP31251W6-7
- 製造商:
- DiodesZetex
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 25 件）*
TWD172.50
(不含稅)
TWD181.00
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2,775 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 25 - 25 | TWD6.90 | TWD172.50 |
| 50 - 75 | TWD6.80 | TWD170.00 |
| 100 - 225 | TWD6.60 | TWD165.00 |
| 250 - 975 | TWD6.50 | TWD162.50 |
| 1000 + | TWD6.40 | TWD160.00 |
* 參考價格
- RS庫存編號:
- 246-7431
- 製造零件編號:
- AP31251W6-7
- 製造商:
- DiodesZetex
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | DiodesZetex | |
| Maximum Switching Frequency | 65kHz | |
| Product Type | PWM Controller | |
| Supply Current | 0.7mA | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 10V | |
| Package Type | SOT-26 | |
| Pin Count | 6 | |
| Topology | Flyback | |
| Maximum Supply Voltage | 25V | |
| Maximum Duty Cycle | 80% | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.45mm | |
| Length | 2.82mm | |
| Standards/Approvals | RoHS | |
| Series | AP31251 | |
| Automotive Standard | AEC-Q200, AEC-Q100, AEC-Q101 | |
| 選取全部 | ||
|---|---|---|
品牌 DiodesZetex | ||
Maximum Switching Frequency 65kHz | ||
Product Type PWM Controller | ||
Supply Current 0.7mA | ||
Mount Type Surface | ||
Minimum Supply Voltage 10V | ||
Package Type SOT-26 | ||
Pin Count 6 | ||
Topology Flyback | ||
Maximum Supply Voltage 25V | ||
Maximum Duty Cycle 80% | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.45mm | ||
Length 2.82mm | ||
Standards/Approvals RoHS | ||
Series AP31251 | ||
Automotive Standard AEC-Q200, AEC-Q100, AEC-Q101 | ||
The DiodesZetex AP31251 is a current mode PWM controller which is optimized for high performance, low standby power and cost effective offline fly back converters. The PWM switching frequency at normal operation is internally fixed (about 65kHz). In middle load, the IC will enter green mode to improve system efficiency with the help of frequency fold back. A minimum switching frequency (about 20kHz) is set to avoid the audible noise. In no load or light load, the IC will enter the burst mode to minimize standby power. Furthermore, the frequency dithering function is built-in to reduce EMI emission. It is available in SOT26 package.
Very low start-up current Non-audible-noise green-mode control Internal slope compensation Soft start during start-up process Frequency fold back for high average efficiency with many other features