onsemi NCP12400CBAAB0DR2G 5 PWM Controller, 65 kHz 28V 7-Pin, SOIC
- RS庫存編號:
- 178-4682
- 製造零件編號:
- NCP12400CBAAB0DR2G
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 10 件）*
TWD239.00
(不含稅)
TWD251.00
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 840 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 620 | TWD23.90 | TWD239.00 |
| 630 - 1240 | TWD23.20 | TWD232.00 |
| 1250 + | TWD23.00 | TWD230.00 |
* 參考價格
- RS庫存編號:
- 178-4682
- 製造零件編號:
- NCP12400CBAAB0DR2G
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Maximum Switching Frequency | 65kHz | |
| Product Type | PWM Controller | |
| Output Current | 500mA | |
| Zero Power Detection | No | |
| Mount Type | Surface | |
| Minimum Supply Voltage | -0.3V | |
| Package Type | SOIC | |
| Pin Count | 7 | |
| Topology | Flyback | |
| Maximum Supply Voltage | 28V | |
| Maximum Duty Cycle | 85% | |
| Minimum Operating Temperature | -40°C | |
| PWM Controller Type | Current Mode | |
| Maximum Operating Temperature | 150°C | |
| Series | NCP | |
| Standards/Approvals | No | |
| Length | 5mm | |
| Height | 1.5mm | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Maximum Switching Frequency 65kHz | ||
Product Type PWM Controller | ||
Output Current 500mA | ||
Zero Power Detection No | ||
Mount Type Surface | ||
Minimum Supply Voltage -0.3V | ||
Package Type SOIC | ||
Pin Count 7 | ||
Topology Flyback | ||
Maximum Supply Voltage 28V | ||
Maximum Duty Cycle 85% | ||
Minimum Operating Temperature -40°C | ||
PWM Controller Type Current Mode | ||
Maximum Operating Temperature 150°C | ||
Series NCP | ||
Standards/Approvals No | ||
Length 5mm | ||
Height 1.5mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The NCP12400 is a new fixed−frequency current−mode controller featuring the Dynamic Self−Supply. This function greatly simplifies the design of the auxiliary supply and the VCC capacitor by activating the internal startup current source to supply the controller during start−up, transients, latch, stand−by etc. This device contains a special HV detector which detects the application unplug from the ac input line and triggers the X2 discharge current. This HV structure allows the brown−out detection as well. It features a timer−based fault detection that ensures the detection of overload and an adjustable compensation to help keep the maximum power independent of the input voltage.
Reduces Overall System Cost and Complexity
Ensures Skip Mode Operation Outside Audible Range
Average Efficiency Meets CoC Tier 2 Compliance
Configurable Protection Tailored for Application Needs