Tektronix TCP300 Series TCP312A Oscilloscope Probe, Current Type, 100 MHz, BNC Connector

RS庫存編號:: 781-0801
Distrelec 貨號:: 110-48-255
製造零件編號:: TCP312A
製造商:: Tektronix

Tektronix TCP300 Series TCP312A Oscilloscope Probe, Current Type, 100 MHz, BNC Connector

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD137,381.00

(不含稅)

TWD144,250.05

訂單超過 $1,300.00 免費送貨

有庫存

4 件準備從其他地點送貨
加上 2 件從 2026年6月22日起發貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD137,381.00

* 參考價格

RS庫存編號:: 781-0801
Distrelec 貨號:: 110-48-255
製造零件編號:: TCP312A
製造商:: Tektronix

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Tektronix
	Probe Type	Current
	Product Type	Oscilloscope Probe
	Bandwidth	100MHz
	Connector Type	BNC
	Model Number	TCP312A
	Number of Probes	1
	Safety Category Level	CAT II, CAT III
	Safety Category Voltage	300V
	Series	TCP300
	Rise Time	3.5ns
	Standards/Approvals	UL 610102032, UL 610101, EN 610101, CAN/CSA C22.2 No 610102032, CAN/CSA C22.2 No 610101, EN 610102032

	選取全部
	品牌 Tektronix
	Probe Type Current
	Product Type Oscilloscope Probe
	Bandwidth 100MHz
	Connector Type BNC
	Model Number TCP312A
	Number of Probes 1
	Safety Category Level CAT II, CAT III
	Safety Category Voltage 300V
	Series TCP300
	Rise Time 3.5ns
	Standards/Approvals UL 610102032, UL 610101, EN 610101, CAN/CSA C22.2 No 610102032, CAN/CSA C22.2 No 610101, EN 610102032

不適用

Tektronix Oscilloscope Probes, TCP312A Series AC/DC Current Probe

The Tektronix TCP312A current oscilloscope probe offers current measurement capabilities of 30A DC continuous. The amplifier, when used with provides a wide range of current measurement capability and spans the gap between low-level milliamp measurements to very high current levels. This oscilloscope onscreen readout of magnitude and amps reduces measurement errors with no more hand calculations.

Note:

Requires TCPA300 amplifier available separately (RS 764-4391)

Features and Benefits

Bandwidth is DC to 100MHz

Lowest measurable current is 1mA

AC/DC input coupling

Insertion impedance is 0.7ohm at 100MHz

Rise time ≤3.5 ns

Typically less than 1% DC gain error

Bare insulated maximum wire voltage is 150V CAT II and 300V CAT II

Low insertion impedance reduces device under test loading

Split-core construction allows easy circuit connection

Status indicators provide Visual operating status and notification of potential error conditions - degauss, probe open, overload, not terminated into 50ohm

Low DC drift and noise allows improved low-level current measurements

Dimensions (LxWxH): 200x60x32 mm

Applications

Current probes are used to help determine how much current a circuit is using and they measure this by clamping around a current carrying conductor. They can be found in:

Development and analysis solutions for designers

Installers and service personnel in telecom data communication

Computers

Semiconductor power electronics environments

Certifications

UL61010-2-032 approved

UL61010-1 approved

CAN/CSA C22.2 No 61010-1 certified

CAN/CSA C22.2 No 61010-2-032 certified

EN61010-1

EN61010-2-032

CAT II 150V

CAT II 300V

Supplied with

Probe ground lead
Instruction sheet
Certificate of traceable calibration