Tektronix P52XXA Series P5200A Oscilloscope Probe, Differential Type, 50 MHz, Hook Tip, Alligator Clip, Pincer Clip

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有Oscilloscope Probes

小計（1 件）*

TWD84,570.00

(不含稅)

TWD88,798.50

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 5 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD84,570.00

* 參考價格

RS庫存編號:
734-5029
Distrelec 貨號:
176-28-177
製造零件編號:
P5200A
製造商:
Tektronix
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Tektronix

Product Type

Oscilloscope Probe

Probe Type

Differential

Bandwidth

50MHz

Maximum Common Mode Input Voltage

1kV

Connector Type

Hook Tip, Alligator Clip, Pincer Clip

Model Number

P5200A

Safety Category Level

CAT ll

Safety Category Voltage

1000V

Series

P52XXA

Standards/Approvals

CE, ISO 9001

不適用

COO (Country of Origin):
CN

Tektronix Oscilloscope Probes


The Tektronix is active deferential voltage oscilloscope probe has a bandwidth of 50MHz and permits selection of 50x or 500x attenuation. It converts floating signals to low voltage ground-referenced signals that can be displayed safely and easily on any ground-referenced oscilloscope.

Note:

TMDP and THDP Series probes have the TekVPI® interface which enables smart communication between oscilloscope and probe - each TekVPI probe features controls and indicators located on the probe compensation box, designed to provide quick and easy access to the probe's most commonly required set-up controls and operating status. P52xxA Series probes have the Tektronix TekProbe® interface which communicates scale information to the oscilloscope.

The P5200A can be used with any oscilloscope and enables users to safely make measurements of floating circuits with their oscilloscope grounded.

Supplied with

2 hook clips

2 pincer clips

2 alligator clips

2 extension cables

Warning

Do not use the P5200A with scopes that have floating inputs (isolated inputs), such as the Tektronix TPS2000 Series. The P5200A requires an oscilloscope or other measurement instruments with grounded inputs.

Features and Benefits


Bandwidth is DC to 50MHz

Attenuation ratio is 1:50 and 1:500

Input impedance is 5Mohmll4pF

Maximum common mode voltage is ±1.3KV

Maximum Input voltage is 1000V CAT II

Wide compensation range (7pF to 30pF)

CMRR (typical) is 100kHz: > -60dB 3.2MHz: > -30dB 100MHz: > -26dB

Overrange indicator

Safety certified

Switchable attenuation

Switchable bandwidth limit

Cable length 1.5m (THDP & TMDP), 1.8m (P52xxA)

Applications


Floating measurements

Switching power supply design

Motor drive design

Electronic ballast design

CRT display design

Power converter design and service

Power device evaluation

BNC interface (P5200A probes)

TekVPI interface (TMDP and THDP Series probes)

TekProbe interface

Certifications


EN 61010-031

UL 61010-031 listed

CAN/CSA-C22.2

IEC 61010-031

IP20 Rating

CAT II

相關連結