Fluke VPS410 Series VPS410-II-R Oscilloscope Probe, Voltage Type, 500 MHz, 10:1, Test Lead Connector
- RS庫存編號:
- 137-2358
- Distrelec 貨號:
- 300-12-380
- 製造零件編號:
- VPS410-II-R
- 製造商:
- Fluke
小計（1 件）*
TWD14,416.00
(不含稅)
TWD15,136.80
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 3 件從 2026年5月04日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD14,416.00 |
* 參考價格
- RS庫存編號:
- 137-2358
- Distrelec 貨號:
- 300-12-380
- 製造零件編號:
- VPS410-II-R
- 製造商:
- Fluke
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Fluke | |
| Product Type | Oscilloscope Probe | |
| Probe Type | Voltage | |
| Attenuation | 10:1 | |
| Bandwidth | 500MHz | |
| Maximum Common Mode Input Voltage | 600V | |
| Connector Type | Test Lead | |
| Model Number | VPS410-II-R | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 1000V | |
| Series | VPS410 | |
| Standards/Approvals | CSA C22.2 No. 1010.2.031, UL 61010031, IEC/EN 61010031 | |
| 選取全部 | ||
|---|---|---|
品牌 Fluke | ||
Product Type Oscilloscope Probe | ||
Probe Type Voltage | ||
Attenuation 10:1 | ||
Bandwidth 500MHz | ||
Maximum Common Mode Input Voltage 600V | ||
Connector Type Test Lead | ||
Model Number VPS410-II-R | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 1000V | ||
Series VPS410 | ||
Standards/Approvals CSA C22.2 No. 1010.2.031, UL 61010031, IEC/EN 61010031 | ||
豁免
- COO (Country of Origin):
- DE
Fluke VPS410 Series Oscilloscope Probe, 500MHz Bandwidth, 1:10 Attenuation - VPS410-II-R
This oscilloscope probe is a voltage test lead intended for industrial and electronics measurements with portable oscilloscopes and motor drive analysers. It offers a stepped voltage ratio to Interface high-voltage circuits with handheld instruments while maintaining protection for the user and the instrument in demanding field environments.
Features & Benefits
• 10:1 attenuation provides safer measurements on high-voltage circuits
• 500 MHz bandwidth preserves signal fidelity at high frequencies
• Double insulated construction supports enhanced user protection
• 10 MΩ input resistance reduces circuit loading during tests
• 11.5±1 pF input capacitance enables predictable compensation
• 1.2m cable length offers flexible probe placement in situ
• 500 MHz bandwidth preserves signal fidelity at high frequencies
• Double insulated construction supports enhanced user protection
• 10 MΩ input resistance reduces circuit loading during tests
• 11.5±1 pF input capacitance enables predictable compensation
• 1.2m cable length offers flexible probe placement in situ
Applications
• Suitable for troubleshooting motor drives and inverter outputs
• Ideal for fault diagnosis on industrial control panels
• Used with portable oscilloscopes in plant maintenance routines
• Can be used for high-frequency signal verification in electronics labs
• Ideal for fault diagnosis on industrial control panels
• Used with portable oscilloscopes in plant maintenance routines
• Can be used for high-frequency signal verification in electronics labs
What maximum common-mode voltages can I measure safely?
The probe is rated for maximum voltage to earth of CAT III 1000V and CAT IV 600 V, permitting measurement on a wide range of industrial systems when used with compatible instruments.
How is the probe’s signal integrity maintained across the frequency range?
Signal fidelity is preserved by a 500 MHz bandwidth combined with a 10:1 attenuation network and specified input capacitance that permit accurate compensation across typical oscilloscope front-ends.
What accessories are included to facilitate connection and grounding?
The kit includes a hook clip for the tip, a ground lead with mini crocodile clip, a ground spring for low-voltage tip use, and an insulation sleeve for the probe tip to assist secure and safe connections.
Are there standards that the probe conforms to for safety verification?
The probe meets IEC/EN 61010-031, UL 61010-031 and CSA C22.2 No.1010.2.031 requirements for probe safety classification.