Honeywell Technologies Piezoresistive Pressure SensorBoard 8 SMT

RS庫存編號:: 226-9682
Distrelec 貨號:: 304-58-836
製造零件編號:: HSCMRRD006MG2A3
製造商:: Honeywell Technologies

Honeywell Technologies Piezoresistive Pressure SensorBoard 8 SMT

此圖片僅供參考，請參閲產品詳細資訊及規格

暫時無法供應

我們無法確定此產品何時有貨，RS 預計將其從我們的產品目錄中移除。

RS庫存編號:: 226-9682
Distrelec 貨號:: 304-58-836
製造零件編號:: HSCMRRD006MG2A3
製造商:: Honeywell Technologies

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Honeywell Technologies
	Maximum Overload Pressure	67.5kPa
	Sensor Type	Piezoresistive Pressure Sensor
	Product Type	Piezoresistive Pressure Sensor
	Mount Type	Board
	Package Type	SMT
	Pin Count	8
	Minimum Supply Voltage	3.3V
	Maximum Operating Pressure	0.6 kPa
	Accuracy	±0.25 %
	Maximum Supply Voltage	5V
	Port Type	Dual Radial Barbed
	Maximum Operating Temperature	85°C
	Series	HSC
	Height	13.75mm
	Length	10mm
	Width	13.3mm
	Standards/Approvals	ISO 9001
	Minimum Operating Pressure	0mbar
	Minimum Operating Temperature	-20°C
	Automotive Standard	ISO 9001

	選取全部
	品牌 Honeywell Technologies
	Maximum Overload Pressure 67.5kPa
	Sensor Type Piezoresistive Pressure Sensor
	Product Type Piezoresistive Pressure Sensor
	Mount Type Board
	Package Type SMT
	Pin Count 8
	Minimum Supply Voltage 3.3V
	Maximum Operating Pressure 0.6 kPa
	Accuracy ±0.25 %
	Maximum Supply Voltage 5V
	Port Type Dual Radial Barbed
	Maximum Operating Temperature 85°C
	Series HSC
	Height 13.75mm
	Length 10mm
	Width 13.3mm
	Standards/Approvals ISO 9001
	Minimum Operating Pressure 0mbar
	Minimum Operating Temperature -20°C
	Automotive Standard ISO 9001

Datasheet - HSCMRRD006MG2A3

Honeywell HSC Series Piezoresistive Pressure Sensor, ±0.25% Accuracy, 0.6kPa Maximum Operating Pressure - HSCMRRD006MG2A3

This piezoresistive pressure sensor provides a calibrated, compensated output for measuring absolute, gage or differential pressures in board-mounted systems. It is designed for use with non-corrosive, non-ionic gases and offers ratiometric analogue or digital outputs while operating from a single 3.3V to 5V supply. The device is suited to Compact electronic assemblies where low power and high measurement fidelity across a standard temperature range are required.

Features and Benefits:

• ±0.25%FSS accuracy reduces software calibration overhead
• Calibrated output update rate up to 2kHz improves responsiveness
• Compensated over 0°C to 50°C for stable in-range performance
• Low power consumption under 10mW extends battery life
• Dual radial barbed port sensor option simplifies fluid connections
• 67.5kPa overload protection sensor supports occasional overpressure

Applications

• Suitable for ventilators and respiratory monitoring equipment
• Ideal for HVAC filter clogging and air-quality detection systems
• Used with laboratory gas-flow and chromatography analysers
• Can be used for portable airflow monitors and spirometers
• Suitable for industrial pneumatic control and flow calibration

What supply voltages does it accept?

It operates from a single supply of either 3.3V or 5.0V.

How does the sensor handle temperature-related errors?

An on-board ASIC provides calibration and temperature compensation for offset, sensitivity and non-linearity within the compensated range.

What media are supported on the pressure ports?

It is intended for non-corrosive, non-ionic gases, liquid-media options exist for ranges ≥40mbar applied to Port1 only.

How fast is the device output for analogue and digital interfaces?

Calibrated output updates near 1kHz for analogue and approximately 2kHz for digital.

What environmental operating limits apply?

The operating temperature range extends from -20°C to 85°C and storage is rated to -40°C to 85°C.