Honeywell Technologies HSCMAND600MG2A3 Pressure SensorBoard 8 SMT
- RS庫存編號:
- 226-9674
- 製造零件編號:
- HSCMAND600MG2A3
- 製造商:
- Honeywell
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 件）*
TWD1,944.00
(不含稅)
TWD2,041.20
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 - 9 | TWD1,944.00 |
| 10 - 24 | TWD1,897.00 |
| 25 - 49 | TWD1,846.00 |
| 50 + | TWD1,810.00 |
* 參考價格
- RS庫存編號:
- 226-9674
- 製造零件編號:
- HSCMAND600MG2A3
- 製造商:
- Honeywell
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Honeywell | |
| Maximum Overload Pressure | 200kPa | |
| Sensor Type | Piezoresistive Pressure Sensor | |
| Product Type | Pressure Sensor | |
| Mount Type | Board | |
| Package Type | SMT | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 60 kPa | |
| Maximum Supply Voltage | 5V | |
| Accuracy | ±0.25 % | |
| Port Type | Single Axial Barbed | |
| Maximum Operating Temperature | +85°C | |
| Standards/Approvals | ISO 9001 | |
| Width | 13.3mm | |
| Series | HSC | |
| Length | 10mm | |
| Height | 13.75mm | |
| Minimum Operating Pressure | 0mbar | |
| Automotive Standard | ISO 9001 | |
| Minimum Operating Temperature | -20°C | |
| 選取全部 | ||
|---|---|---|
品牌 Honeywell | ||
Maximum Overload Pressure 200kPa | ||
Sensor Type Piezoresistive Pressure Sensor | ||
Product Type Pressure Sensor | ||
Mount Type Board | ||
Package Type SMT | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 60 kPa | ||
Maximum Supply Voltage 5V | ||
Accuracy ±0.25 % | ||
Port Type Single Axial Barbed | ||
Maximum Operating Temperature +85°C | ||
Standards/Approvals ISO 9001 | ||
Width 13.3mm | ||
Series HSC | ||
Length 10mm | ||
Height 13.75mm | ||
Minimum Operating Pressure 0mbar | ||
Automotive Standard ISO 9001 | ||
Minimum Operating Temperature -20°C | ||
Honeywell HSC Series Piezoresistive Pressure Sensor, 60kPa Maximum Operating Pressure, ±0.25% Accuracy - HSCMAND600MG2A3
This pressure sensor is a piezoresistive board-mount device designed to measure absolute, gauge or differential pressure in non-corrosive, non-ionic gases and, for select ranges, compatible liquids on Port 1. It is supplied as a calibrated, temperature-compensated transducer with ratiometric analogue or 14-bit digital outputs and is intended for Compact PCB integration where high stability and low power consumption are required.
Features and Benefits:
• ±0.25%FSS BFSL accuracy reduces calibration effort
• Operates from a single 3.3V or 5V supply for flexible designs
• Output updated at approximately 1kHz analogue and 2kHz digital
• Compensated over 0°C to 50°C for consistent performance
• Survives up to 200kPa overload for robust system protection
• Low power consumption <10mW enables extended battery use
• Operates from a single 3.3V or 5V supply for flexible designs
• Output updated at approximately 1kHz analogue and 2kHz digital
• Compensated over 0°C to 50°C for consistent performance
• Survives up to 200kPa overload for robust system protection
• Low power consumption <10mW enables extended battery use
Applications
• Suitable for medical respiratory monitoring and ventilators
• Used with HVAC transmitters and clogged-filter detection systems
• Ideal for gas-flow instrumentation and chromatography analysers
• Can be used for industrial barometry and flow calibrators
• Suitable for pneumatic control and VAV building systems
• Used with HVAC transmitters and clogged-filter detection systems
• Ideal for gas-flow instrumentation and chromatography analysers
• Can be used for industrial barometry and flow calibrators
• Suitable for pneumatic control and VAV building systems
What electrical interfaces are available?
The device provides ratiometric analogue output and digital SPI or I2C options with 12-14-bit resolution depending on digital selection.
What environmental temperatures can it tolerate for operation?
It operates from -20°C to 85°C and is characterised for compensated output within 0°C to 50°C.
How are liquids handled by the sensor?
Liquid-media options are available for Port1 only and are limited to pressure ranges ≥60mbar with precautions against particulates and residue.
What package and mounting formats exist?
It is offered in SMT and other board-mount packages, including an 8-pin SMT layout for surface mounting.
How does it maintain long-term measurement stability?
On-board ASIC calibration and compensation minimise drift, reducing the need for frequent system recalibration.
相關連結
- Honeywell Technologies Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMANV015PAAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMRNN030PA2A3 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMRRN060MDSA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies SSCMRRV015PDAA5 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMRND030PD3A3 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMRRN001ND2A3 Piezoresistive Pressure SensorSurface 8 SMT
- Honeywell Technologies HSCMRRD006MG2A3 Piezoresistive Pressure SensorSurface 8 SMT