Festo, 27 mm R 1/8 In-line Installation Pressure Gauge, 16 bar

RS庫存編號:: 288-7766
製造零件編號:: MA-27-16-R1/8
製造商:: Festo

Festo, 27 mm R 1/8 In-line Installation Pressure Gauge, 16 bar

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD758.00

(不含稅)

TWD795.90

訂單超過 $1,300.00 免費送貨

有庫存

30 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD758.00

* 參考價格

RS庫存編號:: 288-7766
製造零件編號:: MA-27-16-R1/8
製造商:: Festo

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Festo
	Product Type	Pressure Gauge
	Maximum Pressure Measurement	16bar
	Minimum Pressure Measurement	0bar
	Pressure Connection	Pneumatic Connection R1/8
	Connection Size	R 1/8
	Connection Type	In-line Installation
	Accuracy	4 %
	Series	MA-27-16-R1/8
	Case Material	Steel
	Dial Colour	Black
	Dial Size	27mm
	Connection Location	Rear Side Centred
	Maximum Operating Temperature	60°C
	Standards/Approvals	Zone 1 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX), Zone 2 (ATEX)
	Model Number	541733

	選取全部
	品牌 Festo
	Product Type Pressure Gauge
	Maximum Pressure Measurement 16bar
	Minimum Pressure Measurement 0bar
	Pressure Connection Pneumatic Connection R1/8
	Connection Size R 1/8
	Connection Type In-line Installation
	Accuracy 4 %
	Series MA-27-16-R1/8
	Case Material Steel
	Dial Colour Black
	Dial Size 27mm
	Connection Location Rear Side Centred
	Maximum Operating Temperature 60°C
	Standards/Approvals Zone 1 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX), Zone 2 (ATEX)
	Model Number 541733

COO (Country of Origin):: PL

Festo MA-27-16-R1/8 Series Pressure Gauge, 16 Bar Maximum Pressure Measurement, 27mm Dial Size - MA-27-16-R1/8

This pressure gauge is a compact instrument designed to monitor low pneumatic pressures in industrial and hazardous environments. It provides a clear visual reading for processes where confined installation and zoned explosion protection are required, and is intended for inline mounting with the pressure inlet at the rear centre.

Features and Benefits:

• 4% accuracy gives dependable indication for routine monitoring
• Measures from 0 to 16 bar for low-pressure systems
• R1/8 pneumatic connection enables straightforward tube integration
• 27mm dial offers compact yet legible pressure display
• Steel case resists mechanical impact in industrial settings
• Rated to operate up to 60°C for warm process applications

Applications

• Suitable for compressed-air plant pressure checks
• Ideal for pneumatic actuator supply line monitoring
• Used with control panels requiring compact gauges
• Can be used for filter and regulator inspection points
• Appropriate for installations inside zoned hazardous areas

How is the gauge mounted within a pneumatic line?

It is intended for in-line installation with the connection located centrally at the rear, allowing straightforward rear-threaded connection into R1/8 ports.

What certification makes this gauge appropriate for explosive atmospheres?

It carries approvals applicable to Zone 1, Zone 2, Zone 21 and Zone 22 hazardous areas, permitting use where explosive gases or dust may be present.

What temperature limitations should be observed during operation?

The maximum permitted operating temperature is 60°C, so it should not be installed in locations that routinely exceed this limit.

How does the case material affect durability in industrial use?

The steel enclosure provides enhanced mechanical protection against knocks and abrasion common in workshop and plant environments.