Fluke 0 psi to 30 psi Pressure Module

RS庫存編號:: 533-896
製造零件編號:: FLK-PMM-200KA
製造商:: Fluke

此圖片僅供參考，請參閲產品詳細資訊及規格

小計（1 件）*

TWD108,261.00

(不含稅)

TWD113,674.05

訂單超過 $1,300.00 免費送貨

有庫存

1 件準備從其他地點送貨

**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位	每單位
1 +	TWD108,261.00

* 參考價格

RS庫存編號:: 533-896
製造零件編號:: FLK-PMM-200KA
製造商:: Fluke

規格

產品概覽和技術數據資料表

法例與合規

產品詳細資訊

透過選取一個或多個屬性來查找類似產品。

選取全部	屬性	值
	品牌	Fluke
	Battery Type	Rechargeable Lithium-ion
	Product Type	Pressure Module
	Maximum Pressure Measurement	30psi
	Minimum Pressure Measurement	0psi
	Resolution	0.0001 psi
	Pressure Port Type	Absolute
	Data Logging	No
	Current Loop Measurement	Yes
	Display Type	Graphic Colour
	Leak Testing	Yes
	Power Source	Lithium-ion Battery
	Weight	4.9kg
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	50°C
	Width	215mm
	Standards/Approvals	UN 38.3, General IEC 610101, Pollution degree 2, Lithium battery IEC 62133
	Height	290mm
	Length	100mm
	Hazardous Area Certification	IEC 62133
	Plug Type	Type A

	選取全部
	品牌 Fluke
	Battery Type Rechargeable Lithium-ion
	Product Type Pressure Module
	Maximum Pressure Measurement 30psi
	Minimum Pressure Measurement 0psi
	Resolution 0.0001 psi
	Pressure Port Type Absolute
	Data Logging No
	Current Loop Measurement Yes
	Display Type Graphic Colour
	Leak Testing Yes
	Power Source Lithium-ion Battery
	Weight 4.9kg
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature 50°C
	Width 215mm
	Standards/Approvals UN 38.3, General IEC 610101, Pollution degree 2, Lithium battery IEC 62133
	Height 290mm
	Length 100mm
	Hazardous Area Certification IEC 62133
	Plug Type Type A

Datasheet - FLK-PMM-200KA

COO (Country of Origin):: CN

Fluke Pressure Module, 30 psi Maximum Pressure, 0.0001 psi Resolution - FLK-PMM-200KA

This pressure module is a portable absolute pressure tester designed to measure low-pressure systems up to 30 psi in field and workshop environments. It combines a colour graphic display with rechargeable battery power to support leak testing and current loop pressure measurement, facilitating on-site verification and diagnostics where mobility and precision are required.

Features and Benefits:

• Resolution 0.0001 psi for detecting very small pressure changes
• Rechargeable lithium-ion pressure tester for extended field use
• Absolute pressure module Fluke design supports true-zero referencing
• Portable leak testing module 30 psi enables rapid leak checks
• Current loop pressure measurement module offers transmitter compatibility
• IEC62133 lithium battery certified pressure device for battery safety

Applications

• Suitable for servicing pneumatic control systems requiring absolute readings
• Ideal for performing routine leak detection on compressed-air installations
• Used with pressure transmitters for current loop calibration and checks
• Can be used for mobile diagnostics in maintenance and calibration tasks
• Used for pressure verification in laboratory test setups under 30 psi

What transport approvals apply for shipping this device?

It meets UN38.3 requirements for lithium battery transport, allowing compliant shipment.

How does the display assist in field measurements?

The graphic colour display provides clear visualisation of pressure readings and status information for rapid interpretation.

What environmental range can I expect during operation?

The unit operates between -10 °C and 50 °C to accommodate typical field temperature conditions.

What is the device mass for handling and portability considerations?

It weighs 4.9 kg, enabling handheld use while remaining stable during connection to test points.