Infineon BTS3800SLHTSA1 Low Side 1, Low Side Power Switch Power Switch IC 5-Pin, SCT595
- RS庫存編號:
- 823-5718
- 製造零件編號:
- BTS3800SLHTSA1
- 製造商:
- Infineon
可享批量折扣
查看批量定價選項小計（1 包，共 10 件）*
TWD234.00
(不含稅)
TWD245.70
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 7,860 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 740 | TWD23.40 | TWD234.00 |
| 750 - 1490 | TWD22.90 | TWD229.00 |
| 1500 + | TWD22.40 | TWD224.00 |
* 參考價格
- RS庫存編號:
- 823-5718
- 製造零件編號:
- BTS3800SLHTSA1
- 製造商:
- Infineon
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Infineon | |
| Product Type | Power Switch IC | |
| Power Switch Topology | Low Side | |
| Power Switch Type | Low Side Power Switch | |
| Switch On Resistance RdsOn | 0.8Ω | |
| Number of Outputs | 5 | |
| Number of Inputs | 1 | |
| Mount Type | Surface | |
| Package Type | SCT595 | |
| Minimum Supply Voltage | -0.3V | |
| Pin Count | 5 | |
| Maximum Supply Voltage | 5.5V | |
| Operating Current | 4A | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Width | 1.6mm | |
| Length | 2.9mm | |
| Height | 1mm | |
| Standards/Approvals | No | |
| Automotive Standard | AEC | |
| Series | HITFET | |
| 選取全部 | ||
|---|---|---|
品牌 Infineon | ||
Product Type Power Switch IC | ||
Power Switch Topology Low Side | ||
Power Switch Type Low Side Power Switch | ||
Switch On Resistance RdsOn 0.8Ω | ||
Number of Outputs 5 | ||
Number of Inputs 1 | ||
Mount Type Surface | ||
Package Type SCT595 | ||
Minimum Supply Voltage -0.3V | ||
Pin Count 5 | ||
Maximum Supply Voltage 5.5V | ||
Operating Current 4A | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Width 1.6mm | ||
Length 2.9mm | ||
Height 1mm | ||
Standards/Approvals No | ||
Automotive Standard AEC | ||
Series HITFET | ||
- COO (Country of Origin):
- MY
Infineon HITFET Series Power Switch IC, 4A Operating Current, 5.5V Maximum Supply Voltage - BTS3800SLHTSA1
This power switch IC is a compact low-side switching device designed for automotive environments. It provides controlled low-side switching for multiple channels and is intended for surface-mounted assemblies in vehicle electronic systems operating up to typical automotive voltages. The component is built to function across a wide junction temperature range and supports multi-output switching in confined board real estate.
Features and Benefits:
• Five outputs enable concurrent load switching and simplified wiring
• 4A operating current supports moderate automotive loads
• 0.8Ω on-resistance minimises conduction losses during operation
• Accepts supply up to 5.5V for common automotive control rails
• Withstands temperatures up to 150°C for harsh under-bonnet conditions
• 4A operating current supports moderate automotive loads
• 0.8Ω on-resistance minimises conduction losses during operation
• Accepts supply up to 5.5V for common automotive control rails
• Withstands temperatures up to 150°C for harsh under-bonnet conditions
Applications
• Suitable for switching lamps and solenoids in body control modules
• Ideal for multiplexed actuator control in door systems
• Used with vehicle electronics requiring surface-mounted power switches
• Can be used for low-voltage sensor and auxiliary load management
• Ideal for multiplexed actuator control in door systems
• Used with vehicle electronics requiring surface-mounted power switches
• Can be used for low-voltage sensor and auxiliary load management
What mounting considerations should I follow for thermal management?
Use adequate PCB copper around the package to dissipate heat and follow manufacturer thermal pad recommendations to maintain junction temperature under high-duty cycles.
How many control inputs does the device require for full operation?
The part provides a single input controlling multiple outputs, enabling simplified logic drive and fewer MCU pins.
What are recommended electrical limits to avoid damage?
Keep supply voltage below 5.5V and ensure no negative excursions beyond -0.3V on input lines to prevent overstress.
Can this device replace discrete MOSFETs in multi-channel designs?
Yes, it provides a compact alternative to individual low-side MOSFETs by integrating five switching channels in one surface-mount package.
相關連結
- Infineon Low Side 1 SCT595
- Infineon Low Side, Low Side Power Switch IC
- Infineon ICE5AR0680BZSXKLA1 Low Side, Low Side Power Switch IC
- Infineon BTS3104SDLATMA1 Low Side, Low Side Power Switch IC
- Infineon Low Side 2 SOIC
- Infineon Low Side 2 DSO
- Infineon BTS3408GXUMA2 Low Side 2 DSO
- Infineon BTS3410GXUMA1 Low Side 2 SOIC