onsemi UAA2016DG High Side 1, High Side Power Switch IC 8-Pin, SOIC
- RS庫存編號:
- 805-6751
- 製造零件編號:
- UAA2016DG
- 製造商:
- onsemi
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
小計（1 包，共 10 件）*
TWD332.00
(不含稅)
TWD348.60
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 20 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 20 | TWD33.20 | TWD332.00 |
| 30 - 40 | TWD32.40 | TWD324.00 |
| 50 + | TWD31.90 | TWD319.00 |
* 參考價格
- RS庫存編號:
- 805-6751
- 製造零件編號:
- UAA2016DG
- 製造商:
- onsemi
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | onsemi | |
| Power Switch Topology | High Side | |
| Product Type | Power Switch IC | |
| Power Switch Type | High Side | |
| Number of Inputs | 1 | |
| Power Rating | 625mW | |
| Mount Type | Surface | |
| Minimum Supply Voltage | -10V | |
| Package Type | SOIC | |
| Maximum Supply Voltage | -8V | |
| Pin Count | 8 | |
| Operating Current | 0.9mA | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 85°C | |
| Height | 1.5mm | |
| Standards/Approvals | European Standard (Load Switching) | |
| Length | 5mm | |
| Automotive Standard | No | |
| Series | UAA2016 | |
| 選取全部 | ||
|---|---|---|
品牌 onsemi | ||
Power Switch Topology High Side | ||
Product Type Power Switch IC | ||
Power Switch Type High Side | ||
Number of Inputs 1 | ||
Power Rating 625mW | ||
Mount Type Surface | ||
Minimum Supply Voltage -10V | ||
Package Type SOIC | ||
Maximum Supply Voltage -8V | ||
Pin Count 8 | ||
Operating Current 0.9mA | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 85°C | ||
Height 1.5mm | ||
Standards/Approvals European Standard (Load Switching) | ||
Length 5mm | ||
Automotive Standard No | ||
Series UAA2016 | ||
Zero Voltage Switching Controllers
Zero-voltage switching Triac trigger/driver ciruits which facilitate RFI-free power regulation of resistive loads.
The number of complete mains cycles during fixed repeating periods (typically 1 to 10 seconds) is varied, thus altering the duty cycle or on-/off-time ratio. Trigger pulses coincide with the zero-crossing times of the mains supply thus ensuring no RFI is produced when using resistive loads.