ROHM BD1LBU50EFJ-CE2 Low Side, Low Side Power Switch IC 8-Pin, HTSOP-J8
- RS庫存編號:
- 265-5387
- 製造零件編號:
- BD1LBU50EFJ-CE2
- 製造商:
- ROHM
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計（1 包，共 5 件）*
TWD230.00
(不含稅)
TWD241.50
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 2,500 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 5 - 45 | TWD46.00 | TWD230.00 |
| 50 - 95 | TWD39.40 | TWD197.00 |
| 100 - 245 | TWD32.20 | TWD161.00 |
| 250 - 995 | TWD29.80 | TWD149.00 |
| 1000 + | TWD23.60 | TWD118.00 |
* 參考價格
- RS庫存編號:
- 265-5387
- 製造零件編號:
- BD1LBU50EFJ-CE2
- 製造商:
- ROHM
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ROHM | |
| Power Switch Type | Low Side | |
| Power Switch Topology | Low Side | |
| Product Type | Power Switch IC | |
| Switch On Resistance RdsOn | 0.35Ω | |
| Number of Outputs | 1 | |
| Package Type | HTSOP-J8 | |
| Maximum Supply Voltage | 5.5V | |
| Pin Count | 8 | |
| Maximum Operating Temperature | 150°C | |
| Operating Current | 1mA | |
| Minimum Operating Temperature | -55°C | |
| Standards/Approvals | RoHS | |
| Height | 1mm | |
| Length | 6mm | |
| Width | 4.9mm | |
| Series | BD1LBU50EFJ-C | |
| Automotive Standard | AEC-Q100 | |
| 選取全部 | ||
|---|---|---|
品牌 ROHM | ||
Power Switch Type Low Side | ||
Power Switch Topology Low Side | ||
Product Type Power Switch IC | ||
Switch On Resistance RdsOn 0.35Ω | ||
Number of Outputs 1 | ||
Package Type HTSOP-J8 | ||
Maximum Supply Voltage 5.5V | ||
Pin Count 8 | ||
Maximum Operating Temperature 150°C | ||
Operating Current 1mA | ||
Minimum Operating Temperature -55°C | ||
Standards/Approvals RoHS | ||
Height 1mm | ||
Length 6mm | ||
Width 4.9mm | ||
Series BD1LBU50EFJ-C | ||
Automotive Standard AEC-Q100 | ||
The ROHM BD1LB500 Series is an in-vehicle with 1ch low side switch. This switch builds in the overcurrent limiting circuit, thermal shutdown circuit, open load detection circuit and under voltage lock out circuit. It also provides the diagnostic output circuit when an abnormality is detected.
Low standby current
Built in under voltage lock out circuit
Built in open load detection circuit
Built in diagnostic output (ST) terminal
Built in overcurrent limiting circuit