STMicroelectronics High Side, USB Power Power Switch IC 10-Pin, DFN10L
- RS庫存編號:
- 240-0607P
- 製造零件編號:
- STELPD01PUR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計 10 件 (按連續帶提供)*
TWD452.00
(不含稅)
TWD474.60
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 10 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 10 - 95 | TWD45.20 |
| 100 - 245 | TWD44.40 |
| 250 - 495 | TWD43.60 |
| 500 + | TWD42.00 |
* 參考價格
- RS庫存編號:
- 240-0607P
- 製造零件編號:
- STELPD01PUR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Power Switch Type | USB Power | |
| Switch On Resistance RdsOn | 50mΩ | |
| Number of Outputs | 2 | |
| Interface Type | USB | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 4V | |
| Package Type | DFN10L | |
| Pin Count | 10 | |
| Maximum Supply Voltage | 18V | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 5A | |
| Length | 3.15mm | |
| Width | 3.15mm | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Series | STELPD01 | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Power Switch Type USB Power | ||
Switch On Resistance RdsOn 50mΩ | ||
Number of Outputs 2 | ||
Interface Type USB | ||
Mount Type Surface | ||
Minimum Supply Voltage 4V | ||
Package Type DFN10L | ||
Pin Count 10 | ||
Maximum Supply Voltage 18V | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
Operating Current 5A | ||
Length 3.15mm | ||
Width 3.15mm | ||
Standards/Approvals No | ||
Height 1mm | ||
Series STELPD01 | ||
Automotive Standard No | ||
The STMicroelectronics Electronic load switch for power line is an integrated electronic power switch for power rail protection applications. It is able to precisely detect and react to overcurrent and overvoltage conditions. When an overload condition occurs, the device goes into an open state, disconnecting the load from the power supply. An external power MOSFET can be driven to manage the power loss protection in case of fault condition. In case of overvoltage on the input, the device regulates the output to a preset 17.5 V value, Under voltage lockout prevents the load from malfunction, keeping the device off if the rail voltage is too low. The STELPD01 features an adjustable turn-on slew-rate, which is useful to keep the in rush current under control during start-up and hot-swap operations.
Wide input voltage range: 4 V to 18 V
17.5 V typical output overvoltage clamp
Absolute maximum voltage of 23.5 V
5 A maximum continuous current
Thermal protection
Input under voltage lockout
Low inrush current during start-up
Integrated 40 mΩ Power FET
相關連結
- EOZ Push Button Switch Panel Mount SPST 250V ac, IP65
- Festo Compressed Air Pipe Blue Polyurethane 6mm x 50m PUN Series, 159664
- Vishay LH1511BT Series Solid State Relay PCB Mount, 200 V ac/dc Load
- Portescap Brushless DC Motor 15 V dc 9300 rpm, 3mm Shaft Diameter
- Amphenol Industrial Pin Contacts Screw
- Fluke 179 Handheld Digital Multimeter 10A ac Max 1000V ac Max
- Honeywell Amplified Airflow Sensor AWM3000 Series
- Jumo diraTRON Panel Mount PID Temperature Controller 3 Output 2 Relay 110 → 240 V