Infineon High Side 1, High Side Power Switch IC 8-Pin, DSO-8

此圖片僅供參考，請參閲產品詳細資訊及規格

查看所有Power Switch ICs
可享批量折扣

小計（1 卷，共 2500 件）*

TWD68,250.00

(不含稅)

TWD71,650.00

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 加上 2,500 件從 2026年4月27日 起發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位
每單位
每卷*
2500 - 10000TWD27.30TWD68,250.00
12500 +TWD26.50TWD66,250.00

* 參考價格

RS庫存編號:
229-1861
製造零件編號:
ITS4100SSJNXUMA1
製造商:
Infineon
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

Infineon

Product Type

Power Switch IC

Power Switch Type

High Side

Power Switch Topology

High Side

Switch On Resistance RdsOn

70mΩ

Power Rating

1.5W

Number of Inputs

1

Mount Type

Surface

Minimum Supply Voltage

5.5V

Package Type

DSO-8

Pin Count

8

Maximum Supply Voltage

40V

Maximum Operating Temperature

125°C

Minimum Operating Temperature

-40°C

Operating Current

0.005A

Height

1.75mm

Standards/Approvals

No

Length

5mm

Series

ITS4100S-SJ-N

Automotive Standard

No

MOTIX™ TLE9877QXW40 offers reliable solutions for automotive applications such as pumps and fans


The MOTIX™ TLE9877QXW40 is part of the MOTIX™ TLE987x product family. The MOTIX™ TLE9877QXW40 is a single chip 3-Phase motor driver that integrates the industry standard Arm® Cortex®-M3 core, enabling the implementation of advanced motor control algorithms such as field-oriented control. It includes six fully integrated NFET drivers optimized to drive a 3-Phase motor via six external power NFETs, a charge pump enabling low voltage operation and programmable current along with current slope control for optimized EMC behaviour. Its peripheral set includes a current sensor, a successive approximation ADC synchronized with the capture and compare unit for PWM control and 16-bit timers. A LIN transceiver is also integrated to enable communication to the device along with a number of general purpose I/Os. It includes an on-chip linear voltage regulator to supply external loads.

It is a highly integrated AEC-Q100 Grade 0 automotive qualified device enabling cost and space efficient solutions for mechatronic BLDC motor drive applications that are located under-the-hood such as pumps and fans.

Summary of Features


•Six current programmable Drivers with charge pump for N-Channel MOSFET

•Integrated LIN transceiver compatible with LIN 2.2 and SAEJ2602

•Two Full duplex serial interface (UART) with LIN support

•Two Synchronous serial channel (SSC)

•On-chip OSC and PLL for clock generation

•One high voltage monitoring input with wake up functionality

•High speed Operational amplifier for motor current sensing via shunt

•Measurement unit:

8-bit ADC module with 10 multiplexed inputs

10-bit ADC module with 8 multiplexed inputs, 5 external Analog inputs

On chip temperature and battery voltage measurement unit

•Increased Temperature Shutdown supports operation up to Tjmax = 175 °C

•Independent Programmable window watchdog

•5V/1.5V Internal supplies

•External Supply (VDDEXT): 5V+/-2% @ 20mA

•Power saving modes:

MCU slow-down Mode

Sleep Mode

Stop Mode

Cyclic wake-up Sleep Mode

Features of the Microcontroller:


•32 bit Arm® Cortex®-M3 Core, up to 40 MHz clock frequency

•64 kByte flash memory for code and data

•32 kByte Boot ROM memory in code space (used for boot code and IP storage)

•6 kByte RAM memory

•Harvard architecture

•Thumb®-2 Instruction Set and hardware divide and multiplication unit

•Four 16-Bit timers

•Capture/compare unit for PWM signal generation (CCU6) with 2 x 16-bits timers

General Characteristics:


•Operating supply voltage Vs=5.5 to 28V, maximum rating 40V

• Extended operating range Vs=3.0 to 28V, MCU / Flash fully functional

•ESD performance :

up to 2kV / handling on all pins

4kV @ HV inputs

6kV @ LIN pin

•Overvoltage device clamp (load dump ruggedness) up to 40V

•Wide operating temperature range: Tj:-40°C up to 175°C

相關連結