Microchip High Side 1, High Side Power Switch Power Switch IC 8-Pin, SOIC
- RS庫存編號:
- 177-0827
- 製造零件編號:
- MIC2544A-1YM
- 製造商:
- Microchip
此圖片僅供參考，請參閲產品詳細資訊及規格
小計（1 包，共 20 件）*
TWD508.00
(不含稅)
TWD533.40
(含稅)
訂單超過 $1,300.00 免費送貨
最後的 RS 庫存
- 最終 220 個，準備發貨
單位 | 每單位 | 每包* |
|---|---|---|
| 20 + | TWD25.40 | TWD508.00 |
* 參考價格
- RS庫存編號:
- 177-0827
- 製造零件編號:
- MIC2544A-1YM
- 製造商:
- Microchip
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Microchip | |
| Power Switch Type | High Side Power Switch | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Switch On Resistance RdsOn | 120mΩ | |
| Number of Inputs | 1 | |
| Interface Type | ACPI | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Minimum Supply Voltage | 2.7V | |
| Pin Count | 8 | |
| Maximum Supply Voltage | 5.5V | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -40°C | |
| Operating Current | 1.5A | |
| Length | 5mm | |
| Standards/Approvals | No | |
| Series | MIC2544 | |
| Automotive Standard | No | |
| 選取全部 | ||
|---|---|---|
品牌 Microchip | ||
Power Switch Type High Side Power Switch | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Switch On Resistance RdsOn 120mΩ | ||
Number of Inputs 1 | ||
Interface Type ACPI | ||
Mount Type Surface | ||
Package Type SOIC | ||
Minimum Supply Voltage 2.7V | ||
Pin Count 8 | ||
Maximum Supply Voltage 5.5V | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -40°C | ||
Operating Current 1.5A | ||
Length 5mm | ||
Standards/Approvals No | ||
Series MIC2544 | ||
Automotive Standard No | ||
- COO (Country of Origin):
- TH
Microchip Technology Power Switch IC
The Microchip Technology MIC2544 series is a single channel, surface mount 8 pin, SOIC package power switch IC. It has an electric rating of 5.5V and 1.5A. The MIC2544 and MIC2548 are integrated, high side power switches optimized for low loss DC power switching and other power management applications, including advanced configuration and power interface (ACPI). This is a cost-effective, highly integrated solution that requires few external components to satisfy USB and ACPI requirements.
Features and Benefits
• Available with active high or active low enable
• Load current management
• Maximum on-resistance 120mohm
• Off state supply current is 1μA
• Open drain fault flag
• Operating temperature ranges between -40°C and 125°C
• Reverse current flow blocking (no "body diode")
• Thermal shutdown output latch (MIC2548)
• Turn-on and fast turnoff 2ms (slow)
• Typical on state supply current 75μA
Applications
• ACPI power distribution
• Inrush current-limiting
• Notebook PC
• PC card hot swap application
• PCI Bus power switching
• USB power distribution