STMicroelectronics High Side 2, High Side Power Switch IC 32-Pin, QFN 6 x 6
- RS庫存編號:
- 124-561P
- 製造零件編號:
- VNF9Q20FTR
- 製造商:
- STMicroelectronics
此圖片僅供參考，請參閲產品詳細資訊及規格
可享批量折扣
查看批量定價選項小計 10 件 (按連續帶提供)*
TWD1,760.00
(不含稅)
TWD1,848.00
(含稅)
訂單超過 $1,300.00 免費送貨
暫時缺貨
- 3,000 件從 2026年7月20日 起裝運發貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 10 - 99 | TWD176.00 |
| 100 + | TWD170.00 |
* 參考價格
- RS庫存編號:
- 124-561P
- 製造零件編號:
- VNF9Q20FTR
- 製造商:
- STMicroelectronics
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | STMicroelectronics | |
| Product Type | Power Switch IC | |
| Power Switch Topology | High Side | |
| Power Switch Type | High Side | |
| Switch On Resistance RdsOn | 21.5mΩ | |
| Number of Inputs | 2 | |
| Interface Type | SPI | |
| Mount Type | Surface | |
| Package Type | QFN 6 x 6 | |
| Pin Count | 32 | |
| Maximum Supply Voltage | 28V | |
| Operating Current | 34.5A | |
| Maximum Operating Temperature | 150°C | |
| Minimum Operating Temperature | -40°C | |
| Length | 6mm | |
| Standards/Approvals | European directive 2002/95/EC | |
| Automotive Standard | AEC-Q100 | |
| Series | VIPower | |
| 選取全部 | ||
|---|---|---|
品牌 STMicroelectronics | ||
Product Type Power Switch IC | ||
Power Switch Topology High Side | ||
Power Switch Type High Side | ||
Switch On Resistance RdsOn 21.5mΩ | ||
Number of Inputs 2 | ||
Interface Type SPI | ||
Mount Type Surface | ||
Package Type QFN 6 x 6 | ||
Pin Count 32 | ||
Maximum Supply Voltage 28V | ||
Operating Current 34.5A | ||
Maximum Operating Temperature 150°C | ||
Minimum Operating Temperature -40°C | ||
Length 6mm | ||
Standards/Approvals European directive 2002/95/EC | ||
Automotive Standard AEC-Q100 | ||
Series VIPower | ||
The ST Microelectronics device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads directly connected to the ground. The device is protected against voltage transients on the VCC pin. Programming, control, and diagnostics are implemented via the SPI bus. A digital current sense feedback for each channel is provided through an integrated 10-bit ADC. Dedicated trimming bits allow adjusting the ADC reference current.
AEC-Q100 qualified
Programmable Bulb/LED mode for all channels
Advanced limp-home functions for robust fail-safe system
Very low standby current
Optimized electromagnetic emissions
Very low electromagnetic susceptibility
Control through direct inputs and/or SPI
Full configurable wire harness protection (STi²Fuse)
Load current limitation
Self-limiting of fast thermal transients