- RS庫存編號:
- 124-5480
- 製造零件編號:
- 2305
- 製造商:
- ADAFRUIT INDUSTRIES
當前暫無庫存,可於03/06/2024發貨,6 工作日送達。
已增加
單價(不含稅) 個
TWD331.00
(不含稅)
TWD347.55
(含稅)
單位 | Per unit |
1 - 4 | TWD331.00 |
5 - 9 | TWD296.00 |
10 + | TWD265.00 |
- RS庫存編號:
- 124-5480
- 製造零件編號:
- 2305
- 製造商:
- ADAFRUIT INDUSTRIES
法例與合規
產品詳細資訊
Adafruit DRV2605L Haptic Motor Controller Board
This tiny little board is designed for controlling haptic motors. Rather than just turning the motor on and off, this controller has a range of vibration effects stored in the chips memory. For example, the vibration level going up and down, 'click' effects, different buzzer levels or the vibration pattern following a musical/audio input.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
The controller chip is the TI DRV2605 (RS 914-2942) and can be used with both Linear Resonance Actuator (LRA) and Eccentric Rotating Mass (ERM) type motors. The chip is controlled over I2C and compatible with both 3 V and 5 V power/logic.
Arduino code is available from Adafruit.com and porting it to other I2C-capable processor is relatively straight forward.
Board dimensions: 18 x 17 x 2 mm (0.7" x 0.7" x 0.1")
1.0 g
1.0 g
Motor Controllers & Drivers
規格
屬性 | 值 |
---|---|
For Use With | Haptic Motor |
Kit Classification | Development Board |
Featured Device | DRV2605L |
Kit Name | Controller Board |