ADAFRUIT INDUSTRIES FeatherWing Add-On Board Stepper Motor for ATmega32U4, ATSAM M0, ESP8266 for All Feather Board

查看此類別

小計（1 件）*

TWD696.00

(不含稅)

TWD730.80

(含稅)

Add to Basket
選擇或輸入數量
有庫存
  • 8 件準備從其他地點送貨
**需要更多嗎？**輸入您需要的數量，然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位
每單位
1 +TWD696.00

* 參考價格

RS庫存編號:
124-5528
Distrelec 货号:
301-39-099
製造零件編號:
2927
製造商:
ADAFRUIT INDUSTRIES
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

ADAFRUIT INDUSTRIES

Power Management Function

Stepper Motor

Product Type

Evaluation Board

For Use With

All Feather Board

Kit Classification

Add On Board

Featured Device

ATmega32U4, ATSAM M0, ESP8266

Kit Name

FeatherWing Add-On Board

Standards/Approvals

No

Distrelec Product Id

30139099

COO (Country of Origin):
US

DC Motor / Stepper Motor FeatherWing


FeatherWings add specific functionality to your Feather development board. They fit directly on top of your Feather using stacking header pins.

The DC Motor / Stepper Motor FeatherWing enables you to add either two bi-polar stepper motors or four brushed DC motors to your Feather project. It uses the I2C (SDA & SCL pins) to control all the motor and speed controls.

You can stack up to 32 wings giving you a maximum of 64 steppers or 128 DC motors. Supported by the Arduino software library.

- 4 full H-Bridges with 1.2A per bridge complete with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5 V dc to 13.5 V dc.

- Up to 4 bi-directional DC motors with individual 12-bit speed selection (roughly 0.02% resolution)

- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.

- Motors automatically disabled on power-up

- 3.5 mm terminal block connectors (18-26 AWG)

- Polarity protected 2-pin terminal block and jumper to connect external power, for separate logic/motor supplies

- Board dimensions: 50.8 x 22.9 x 1.6 mm / 2" x 0.9" x 0.06"

- Weight: 4.6 g

Adafruit FeatherWing Add-On Boards


相關連結