ROHM BD7695FJ-E2, PFC Controller, 38 V 8-Pin, SOP-J8
- RS庫存編號:
- 266-3783
- 製造零件編號:
- BD7695FJ-E2
- 製造商:
- ROHM
可享批量折扣
小計(1 包,共 10 件)*
TWD197.00
(不含稅)
TWD206.80
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2,490 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 | 每包* |
|---|---|---|
| 10 - 40 | TWD19.70 | TWD197.00 |
| 50 - 90 | TWD18.70 | TWD187.00 |
| 100 - 240 | TWD15.40 | TWD154.00 |
| 250 + | TWD14.40 | TWD144.00 |
* 參考價格
- RS庫存編號:
- 266-3783
- 製造零件編號:
- BD7695FJ-E2
- 製造商:
- ROHM
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | ROHM | |
| IC Type | Power Factor Correction IC | |
| Maximum Supply Current | 0.6 mA | |
| Package Type | SOP-J8 | |
| Pin Count | 8 | |
| Maximum Operating Supply Voltage | 38 V | |
| 選取全部 | ||
|---|---|---|
品牌 ROHM | ||
IC Type Power Factor Correction IC | ||
Maximum Supply Current 0.6 mA | ||
Package Type SOP-J8 | ||
Pin Count 8 | ||
Maximum Operating Supply Voltage 38 V | ||
The ROHM power factor correction IC is suitable for AC or DC supply, also for all products needing power factor improvement. The PFC adopts boundary conduction mode and switching loss reduction and noise reduction are possible by zero current detection. This IC incorporates a circuit for reducing total harmonics distortion and can support IEC61000-3-2 Class-C.
Low power consumption
VCC UVLO function
Static OVP by the vs pin error amplifier input short protection
Stable MOSFET gate drive soft start
VCC UVLO function
Static OVP by the vs pin error amplifier input short protection
Stable MOSFET gate drive soft start
For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.
相關連結
- ROHM BD7695FJ-E2 38 V 8-Pin, SOP-J8
- ROHM BD7693FJ-E2 50 kHz SOP
- ROHM BD7694FJ-E2 50 kHz
- ROHM BD7695FJ-EVK-001 Evaluation Board for BD7695FJ for Power Factor Correction Controller IC
- ROHM 12.5 V 8-Pin, SOP-J8 BM1P105FJ-E2
- ROHM BM1Q041FJ-E2 SOP-J8
- onsemi NCP1623ADR2G, PFC Controller
- STMicroelectronics STNRG011ATR, PFC Controller
