Festo G3/8 in Lubricator 12 bar, MS Series
- RS庫存編號:
- 793-205
- 製造零件編號:
- MS4-LOE-AGC-R
- 製造商:
- Festo
小計(1 件)*
TWD3,162.00
(不含稅)
TWD3,320.10
(含稅)
訂單超過 $1,300.00 免費送貨
有庫存
- 2 件準備從其他地點送貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。
單位 | 每單位 |
|---|---|
| 1 + | TWD3,162.00 |
* 參考價格
- RS庫存編號:
- 793-205
- 製造零件編號:
- MS4-LOE-AGC-R
- 製造商:
- Festo
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | Festo | |
| Product Type | Lubricator | |
| Port Size | G3/8 in | |
| Series | MS | |
| Connection Thread Standard | G | |
| Oil Capacity | 30cm³ | |
| Maximum Operating Pressure | 12 bar | |
| Oil Feed Type | Oil Mist Lubricator | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | ISO 8573-1:2010, RoHS | |
| Bowl Material | Polycarbonate | |
| 選取全部 | ||
|---|---|---|
品牌 Festo | ||
Product Type Lubricator | ||
Port Size G3/8 in | ||
Series MS | ||
Connection Thread Standard G | ||
Oil Capacity 30cm³ | ||
Maximum Operating Pressure 12 bar | ||
Oil Feed Type Oil Mist Lubricator | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals ISO 8573-1:2010, RoHS | ||
Bowl Material Polycarbonate | ||
- COO (Country of Origin):
- HU
Festo Series MS Lubricator, 30cm³ Oil Capacity, 12 bar Maximum Operating Pressure - MS4-LOE-AGC-R, Numeric Part Number: 8232827
This lubricator supplies a controlled oil mist into compressed Air lines to maintain moving pneumatic components. It is intended for vertical installation with minimal tilt and is compatible with compressed Air specified to ISO 8573-1:2010. The unit accepts G-thread connections and is suitable for environments with moderate corrosion stress, operating across typical ambient and media temperatures.
Features and Benefits:
• 0.1 MPa to 1.2 MPa operating pressure range for flexible system use
• 30 cm³ oil reservoir for prolonged service intervals
• G3/8 pneumatic ports for standard G-thread connections
• Polycarbonate bowl with plastic guard for Visual oil level monitoring
• NBR Seals and die-cast aluminium body for Durable component life
• 30 cm³ oil reservoir for prolonged service intervals
• G3/8 pneumatic ports for standard G-thread connections
• Polycarbonate bowl with plastic guard for Visual oil level monitoring
• NBR Seals and die-cast aluminium body for Durable component life
Applications
• Suitable for lubricating pneumatic actuators and cylinders
• Ideal for Air preparation units in assembly stations
• Used with inert gas supplies in controlled automation lines
• Can be used for lubrication in moderate-corrosion workshop areas
• Ideal for Air preparation units in assembly stations
• Used with inert gas supplies in controlled automation lines
• Can be used for lubrication in moderate-corrosion workshop areas
What mounting orientation is required for correct operation?
It must be mounted vertically within ±5° to ensure proportional mist delivery.
What oil viscosity is recommended for the lubricator?
Use oil with ISO VG32 viscosity to achieve intended feed behaviour.
What are the approved media and cleanliness standard?
The device is for compressed Air conforming to ISO 8573-1:2010 and inert gases.
How does the unit indicate corrosion resistance level?
Corrosion resistance is classified as CRC2, indicating moderate corrosion stress tolerance.
相關連結
- Festo G3/4 in Lubricator 16 bar, MS Series
- Festo 1/8 in G Pneumatic Lubricator 12 bar, MS Series
- Festo 1/4 in G Pneumatic Air Lubricator 12 bar, MS Series
- Festo 1/4 in G Pneumatic Lubricator 12 bar, MS Series
- Festo G1 in Lubricator 16 bar, MS Series
- Festo MS Filter Regulator G3/8 in 12 bar, 8232868
- Festo MS Filter Regulator G3/8 in 12 bar, 8232863
- Festo MS Filter Regulator G3/8 in 12 bar, 8232869
