SMC EX600 series 0.7 Mpa Pneumatic Logic Controller

This pneumatic logic controller provides centralised pneumatic sequencing and electrical interfacing for automation systems. It is designed to manage directional control and logic functions using compressed Air while integrating with 24V electronic control circuits. The unit is intended for industrial settings where compact, mixed pneumatic to electrical control is required.

• Eight pneumatic inputs with precise logic mapping for complex sequences
• Eight PNP outputs enabling direct sourcing to control devices
• 24V supply compatibility for common industrial control networks
• 5‑pin M12 socket connection for robust field wiring
• LCD backlight for clear status reading in low light conditions
• Rated to operate between −10°C and +50°C for varied environments
• Maximum working pressure 0.7 MPa supporting typical factory Air systems
• Air media compatibility for standard compressed‑Air installations

• Suitable for pneumatic valve sequencing in assembly lines
• Ideal for integrating Air logic into PLC‑based stations
• Used with conveyors requiring timed pneumatic actuation
• Can be used for automated gripping and handling systems
• Suitable for test rigs that combine pneumatic and electrical controls

The unit uses a 5‑pin M12 socket to simplify wiring and provide a sealed connector Interface for sensors and actuators.

Outputs are PNP, delivering positive switching compatible with sourcing input devices and common industrial controllers.

The controller is specified for use with compressed Air as the operating medium.

The device width is 106mm and height is 64.4 mm, with a depth of 63.2mm to inform panel or enclosure cut‑outs.