SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting, AS2301F-01-08SA, Inlet Female,
- RS庫存編號:
- 392-763
- 製造零件編號:
- AS2301F-01-08SA
- 製造商:
- SMC
暫時無法供應
抱歉，我們不知道何時會到貨。
- RS庫存編號:
- 392-763
- 製造零件編號:
- AS2301F-01-08SA
- 製造商:
- SMC
規格
產品概覽和技術數據資料表
法例與合規
產品詳細資訊
透過選取一個或多個屬性來查找類似產品。
選取全部 | 屬性 | 值 |
|---|---|---|
| 品牌 | SMC | |
| Product Type | Pneumatic Silencer & Exhaust Restrictor Function Fitting | |
| Outlet Connection Type | One-touch Fitting | |
| Inlet Connection Type | 1/8 in R | |
| Sub Type | Speed Controller | |
| Inlet Connection Size | 1/8 in | |
| Outlet Connection Size | 8 mm | |
| Series | AS | |
| Inlet Thread Standard | R | |
| Inlet Port Gender | Female | |
| Maximum Operating Pressure | 1 Mpa | |
| Outlet Port Gender | Male | |
| Material | Brass, Polybutylene Terephthalate | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 60°C | |
| Standards/Approvals | RoHS | |
| Hazardous Area Certification | No | |
| Minimum Operating Pressure | 0.1MPa | |
| Model Number | AS2301F-01-08SA | |
| Proof Pressure | 1.5MPa | |
| 選取全部 | ||
|---|---|---|
品牌 SMC | ||
Product Type Pneumatic Silencer & Exhaust Restrictor Function Fitting | ||
Outlet Connection Type One-touch Fitting | ||
Inlet Connection Type 1/8 in R | ||
Sub Type Speed Controller | ||
Inlet Connection Size 1/8 in | ||
Outlet Connection Size 8 mm | ||
Series AS | ||
Inlet Thread Standard R | ||
Inlet Port Gender Female | ||
Maximum Operating Pressure 1 Mpa | ||
Outlet Port Gender Male | ||
Material Brass, Polybutylene Terephthalate | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 60°C | ||
Standards/Approvals RoHS | ||
Hazardous Area Certification No | ||
Minimum Operating Pressure 0.1MPa | ||
Model Number AS2301F-01-08SA | ||
Proof Pressure 1.5MPa | ||
- COO (Country of Origin):
- JP
SMC Series AS Pneumatic Silencer & Exhaust Restrictor Function Fitting, 1/8 inches Inlet Connection size, 8mm Outlet Connection size - AS2301F-01-08SA
This pneumatic silencer & exhaust restrictor function fitting is a Compact flow-control device designed for pneumatic systems where controlled exhaust and noise attenuation are required. It connects a 1/8 R female supply to an 8mm one-touch outlet, combining flow regulation with muffling to manage exhaust behaviour in automated and industrial installations.
Features & Benefits
• Maximum operating pressure 1MPa delivers consistent control under load
• Rated to 60°C supports elevated-temperature operation
• Proof pressure 1.5MPa provides margin for transient pressure spikes
• Minimum operating pressure 0.1MPa permits low-pressure modulation
• Brass and polybutylene terephthalate construction resists wear and corrosion
• RoHS compliance meets material-restriction requirements for installations
• Rated to 60°C supports elevated-temperature operation
• Proof pressure 1.5MPa provides margin for transient pressure spikes
• Minimum operating pressure 0.1MPa permits low-pressure modulation
• Brass and polybutylene terephthalate construction resists wear and corrosion
• RoHS compliance meets material-restriction requirements for installations
**Applications**
• Suitable for cylinder exhaust throttling in assembly automation
• Ideal for pneumatic panel installations requiring reduced noise
• Used for flow control on Air preparation units in production lines
• Can be used with pick-and-place equipment to adjust actuation speed
• Suitable for retrofitting into existing compressed-Air manifolds
• Ideal for pneumatic panel installations requiring reduced noise
• Used for flow control on Air preparation units in production lines
• Can be used with pick-and-place equipment to adjust actuation speed
• Suitable for retrofitting into existing compressed-Air manifolds
What port genders are used for inlet and outlet connections?
The inlet accepts a female 1/8 R threaded connection while the outlet uses a male 8mm one-touch fitting for Rapid tube attachment.
How does the unit behave under low-temperature conditions?
It is specified to operate down to -5°C, maintaining flow-control characteristics within that temperature range.
Which materials are in contact with the medium and what are their roles?
The fitting combines brass for mechanical strength at the threaded inlet and polybutylene terephthalate for the one-touch outlet and internal components to balance durability and moulded precision.
Is the device suitable where brief overpressure events occur?
Yes, the 1.5MPa proof pressure provides a safety margin against short-term pressure excursions above normal operating pressure.
相關連結
- SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,
- SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,
- SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,
- SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,
- SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,
- SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,
- SMC AS Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,
- SMC AS2 Series Speed Controller Pneumatic Silencer & Exhaust Restrictor Function Fitting Inlet Female,