SKF FRB 4/120 Locating Ring -, 110 mm ID

可享批量折扣
查看批量定價選項

小計(1 件)*

TWD406.00

(不含稅)

TWD426.30

(含稅)

Add to Basket
選擇或輸入數量
暫時缺貨
  • 從 2026年12月16日 發貨
**需要更多嗎?**輸入您需要的數量,然後按一下「查看送貨日期」以查詢更多庫存和送貨詳細資訊。

單位
每單位
1 - 5TWD406.00
6 +TWD389.00

* 參考價格

RS庫存編號:
506-810
製造零件編號:
FRB 4/120
製造商:
SKF
透過選取一個或多個屬性來查找類似產品。
選取全部

品牌

SKF

Inside Diameter

110mm

Product Type

Locating Ring

Material

Cast Iron

Centre Height

80mm

Mount Hole Size

16 mm

Length

275mm

Depth

110mm

Mount Hole Centre-to-Centre

230mm

Standards/Approvals

No

Height

110mm

豁免

COO (Country of Origin):
CN

SKF Locating Ring, 110mm Inside Diameter, 80mm Centre Height - FRB 4/120


This locating ring is a cast iron component designed to position and support rotating or fixed assemblies within industrial equipment. It is used in contexts where accurate axial location is required to maintain alignment and assembly stability, particularly in automation and mechanical systems.

Features & Benefits


• 80mm centre height improves alignment consistency during installation
• 110mm depth supports robust axial seating for mounted components
• 110mm inside diameter accommodates common shaft or bore interfaces
• 275mm overall length enables integration into extended flanged assemblies
• 16mm mount holes allow secure bolting to mating structures
• 230mm mount hole pitch ensures repeatable positioning between fixings

**Applications**


• Suitable for locating flanged housings in automated machinery
• Ideal for aligning motor-to-gearbox interfaces in electrical drives
• Used with control cabinets requiring precise fixture points
• Can be used for jigs and fixtures in electronics assembly lines
• Used for component retention in mechanical manufacturing cells

What material properties affect vibration damping in this component?


The part is MADE from cast iron which provides inherent mass and damping characteristics that reduce transmission of high-frequency vibration in mounted assemblies.

How does the mount hole arrangement influence load distribution?


The 230mm centre-to-centre spacing combined with 16mm holes spreads clamping forces across the flange, reducing local stress and improving load sharing among fastenings.

Can this component accommodate larger shafts without modification?


The internal aperture is 110mm so larger shaft interfaces would require an adaptor or machining to increase the bore size to fit alternate diameters.

What considerations apply when integrating into existing equipment footprints?


Account for the 275mm length and 110mm height when planning clearances and ensure the 80mm centre height aligns with neighbouring axial datum references.

相關連結

第一時間了解我們的最新產品和優惠

電郵

您在訂閱此郵件時提供的個人信息將根據《隱私政策》進行處理。